Kent · England
Bath Repair in Bethersden
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Bethersden and across Kent. Send pictures for a free, fixed quote.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips caused by builders
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our bath repair in Bethersden
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You won’t need a plumber or tiler, because the bath doesn’t move. If you are dealing with damage done while the bathroom was being fitted and rusty patches near the plughole, we can help, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths alike.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Bethersden (TN26)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Give the bath a quick rinse after use
- Make sure an acrylic bath is firm underfoot
- Do not leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your pictures, we will talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Ask for a price
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Bethersden, and we’ll reply with a fixed price.
Advice
Questions from Bethersden
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so let us know about it.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How much does bath repair cost in Bethersden?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Our work in Bethersden
Bethersden is about 5 miles west of Ashford, in Kent. Clients in Bethersden get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Bethersden is one of 922 towns and villages in Kent we cover. Our jobs stretch from Bethersden to London (about 45 miles away).
Every address in TN26 is within our area. That includes homes on The Dene, Forge Hill and Forgefield. Neighbouring places we cover include Wissenden (1 mile north-west), Further Quarter (2 miles west), Chambers' Green (2 miles north), Maltman's Hill (2 miles north-west) and High Halden (3 miles south-west). Larger places within reach include Maidstone (14 miles north-west), Ashford (5 miles east), Sittingbourne (15 miles north), Faversham (14 miles north-east), Hythe (15 miles east) and Davington (14 miles north-east).
Local landmarks in Bethersden
Typical jobs here are in homes near Church of St Margaret, The George Public House and Bethersden Primary School and the streets around them. Bethersden’s nearest station is Pluckley station, about 2 miles north. A little further out are Woodchurch Village Life Museum (3.1 miles south) and Romden Castle (2.4 miles north-west). For a walk, there’s Orlestone Forest.
What bath repair costs
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- How many items we do on one visit
- Unusual colours or finishes
- The material
- The type of damage
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- A clear, close picture of the problem area
- A photo taken from further back
- What it’s made of, if you know
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Towns and villages near Bethersden
Other services in Bethersden
Repairing versus replacing in Bethersden
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Bethersden
- Most jobs done in one visit
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- A year’s guarantee on all work
Read our pricing and bath cost comparison.
Do you need bath repair in Bethersden?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Rust by the waste and overflow
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
Before you book anyone
- What happens if they find more damage
- Whether a trained technician does the job
- How to care for the finish
- When it can be used again
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
