Kent · England
Bath Repair in High Halden
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in High Halden, with a one-year guarantee on every repair.
- Repairs from £95
- Deep scratches in acrylic
- Cracks in an acrylic bath
About our bath repair in High Halden
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can normally use the bath the next day. We regularly repair whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are chips caused by builders and scratches you can feel with a fingernail.
All our work comes with a one-year guarantee.
- Location
- High Halden (TN26)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
High Halden and nearby
High Halden is about 7 miles west of Ashford, in Kent. Clients in High Halden get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We work in all 922 towns and villages in Kent, from the larger towns to small villages. We work right across the region, from High Halden to London (44 miles away).
All of TN26 is covered, from the main roads to the quietest streets. From Woodgates Close, Little Robhurst and Tilden Close or a nearby road, we can come to you. Nearby, we also work in Further Quarter (1 mile north), Wissenden (2 miles north), Bethersden (3 miles north-east), Maltman's Hill (4 miles north) and Chambers' Green (4 miles north). We also work in nearby towns such as Maidstone (14 miles north-west), Ashford (7 miles east), Foley Park (15 miles north-west), Paddock Wood (15 miles west), Tenterden (3 miles south) and Bearsted (13 miles north-west).
What’s near High Halden
We visit homes around High Halden Church of England Primary School, Homewood School and Parish Church of St Mary, among other places. The nearest railway station is Pluckley station, about 3.9 miles north of the centre. Further afield, we also cover the area around Romden Castle (2.9 miles north) and Woodchurch Village Life Museum (2.7 miles south-east).
Places near High Halden
What else we do in High Halden
What we cannot put right
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Should you replace it?
Replacing a fitted bath generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
What you get with us
- One-year guarantee on every repair
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
Take a look at our full price list or bath cost comparison.
Signs you need bath repair in High Halden
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The things clients normally mention when they call are:
- Snagging damage from a refit
- Cracks in an acrylic bath
- Impact holes in acrylic
- Chips under the taps
Comparing quotes
- How the room is protected while they work
- What prep work is covered
- How the colour is matched
- Whether there are any call-out or travel charges
Prices and what affects them
Prices start from £95. We price every job individually. What matters most is:
- The size and number of damaged areas
- Access to the area
- The colour and finish to match
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
You can typically get a fixed price without us visiting. To make it quick:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Keeping it looking good
So the finish stays in good condition:
- Check that an acrylic bath doesn’t move when you stand in it
- Keep metal cans and razors off the surface
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Open a window if you can
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
For a price in High Halden, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
FAQs for High Halden
How do I get a price for bath repair in High Halden?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you cover the entire of Kent?
The whole UK, including all of Kent. Just include your postcode and we’ll confirm dates.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
About our accreditations · Every repair comes with a one-year guarantee.
