Lincolnshire · England

Bath Repair for Bicker Gauntlet homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bicker Gauntlet, with a one-year guarantee on every repair.

  • Repairs from £95
  • Rusty patches near the plughole
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Bicker Gauntlet homes

About our bath repair in Bicker Gauntlet

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. We are often asked to fix rusty patches near the plughole and hairline or through cracks in acrylic, on acrylic, cast iron enamel and pressed steel enamel.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Before and after: a damaged acrylic bath corner repaired in place
Location
Bicker Gauntlet (PE20)
Area hub
Lincolnshire
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Aftercare tips

Once the work has cured, treat it gently:

  • Have new chips seen to early
  • Don’t leave razors or cans standing in the bath
  • Rinse the bath after use, especially in hard water areas
  • Do not scrub with anything abrasive

There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Do you need bath repair in Bicker Gauntlet?

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

Most people get in touch when they notice something like this:

  • Scratches you can feel with a fingernail
  • Holes from dropped items
  • Snagging damage from a refit
  • Damage beneath the taps

What your quote should include

  • A fixed quote, and whether VAT is included
  • Whether there are any call-out or travel charges
  • How long the guarantee is and what it covers
  • What aftercare is recommended

10 questions to ask before you book

Repairing versus replacing in Bicker Gauntlet

A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. We charge the same wherever you are, so there’s no premium for Bicker Gauntlet. The job itself decides the price: the material, the amount of damage and how many items.

Why Bicker Gauntlet customers choose us

  • Straight answers about what a repair can do
  • Everything repaired in place
  • Usually one visit, start to finish
  • Work done at your home or business

See our full price list or resurfacing vs replacement cost guide.

Covering Bicker Gauntlet

Bicker Gauntlet is about 7 miles south-west of Boston, in Lincolnshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Our technicians cover all 732 towns and villages across Lincolnshire. Our jobs stretch from Bicker Gauntlet to Birmingham (about 78 miles away).

Our repair technicians cover all of the PE20 postcode area and the streets around it. We regularly work on streets such as Fore Lane, Back Lane and North Drove and the roads around them. We also cover the places around Bicker Gauntlet: Bicker (1 mile south), Bicker Bar (1 mile east), Swineshead (1 mile north-east), Drayton (2 miles east) and Hoffleet Stow (2 miles south-east). Further out, we also cover Boston (7 miles north-east), Spalding (10 miles south), Sleaford (10 miles north-west), Bourne (14 miles south-west), Holbeach (12 miles south-east) and Austerby (14 miles south-west).

Near you in Bicker Gauntlet

Typical jobs here are in homes near Church of St Swithin and The Thomas Cowley High School, among other places. The closest station to Bicker Gauntlet is Swineshead station, roughly 2.4 miles north of the centre.

Map of Bicker Gauntlet © OpenStreetMap contributors

Bicker Gauntlet: your questions answered

How much does bath repair cost in Bicker Gauntlet?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Can you repair a failed DIY repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

Do you cover the whole of Lincolnshire?

The whole UK, including all of Lincolnshire. Send your postcode with your pictures and we will confirm dates.

Is there a guarantee?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do you do work for letting agents?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

How long does the repair take to cure?

Normally by the following day, though it depends on what we have done.

What bath repair costs

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • How many areas need work
  • Whether we combine several jobs
  • The colour and finish to match
  • What the surface is made of

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Send pictures for a quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A wider photo showing the entire bath
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Honest limits

In fairness, some problems need a different fix:

  • Flexing caused by a failed cradle or loose feet
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

The process

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, tidy-up included.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Preparing for the visit

  • Make sure the room can be ventilated
  • Plan for the room to be out of bounds to pets and children
  • Clear toiletries, mats and anything else from around the area

Ask for a price

To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.