York · England
Bath chip & crack repair in Bilbrough, York
Our technicians come to Bilbrough for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Cracks in an acrylic bath
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- One price list for the entire UK
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- One-year guarantee on every repair
See our full price list and guide to resurfacing and replacement costs.
About our bath repair in Bilbrough
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We regularly repair whirlpool & spa baths, roll-top & freestanding and acrylic, and the jobs we see most are hairline or through cracks in acrylic and chips on the rim or sides.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Bilbrough (YO23)
- County
- York
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Our work in Bilbrough
Bilbrough is about 5 miles south-west of York, in York. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Bilbrough is one of 79 towns and villages in York we cover. Our jobs stretch from Bilbrough to Leeds (16 miles away).
Our visits in YO23 are booked in the same way as anywhere else. From Back Lane, Cat Lane and Moor Lane or anywhere nearby, a technician can come to you. Other places close to Bilbrough include Colton Lane End (1 mile south), Askham Richard (1 mile north), Askham Bryan (2 miles north-east), Copmanthorpe (2 miles east) and Rufforth (3 miles north). We also work in nearby towns such as York (5 miles north-east), Clementhorpe (5 miles north-east), Bishophill (5 miles north-east), Hungate (6 miles north-east), Clifton (6 miles north-east) and Tang Hall (7 miles north-east).
Local landmarks in Bilbrough
Locally, our jobs take us to homes close to Boroughbridge High School, Church of St James and Buckles Inn, among other places. The nearest railway station is Ulleskelf station, roughly 4.2 miles south. Further afield, we also cover the area around The Ark Museum (3.4 miles south-west) and Kyme Castle (4.2 miles west).
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Common questions in Bilbrough
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you come to Bilbrough?
Yes. We work across the UK and travel to Bilbrough. Send pictures and we will quote, or call 0345 017 0787.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Towns and villages near Bilbrough
What else we do in Bilbrough
What bath repair costs
Repairs from £95. There’s no area surcharge for Bilbrough. What changes the price is:
- The material
- Unusual colours or finishes
- How much damage there is
- How easy the damage is to reach
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A picture taken from further back
- Where you are, by postcode
- One sharp close-up of the damage
- What it’s made of, if you know
Email us photos of the damage and one of the whole item, and tell us you’re in Bilbrough, and we’ll come back with a fixed quote.
Signs you need bath repair in Bilbrough
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Most people get in touch when they notice one of these:
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Chips under the taps
- Hairline or through cracks in acrylic
What your quote should include
- Is the price fixed, and does it include VAT?
- What preparation is included
- Who will actually do the work
- Aftercare advice
The process
We work cleanly and quietly. Protection goes down first, then the work takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the next day, the bath is ready to use.
Preparing for the visit
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Getting a price
For a price in Bilbrough, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
