Norfolk · England
Bath Repair in Bintree
Fixed-price bath repair in Bintree and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- A kit repair that didn’t last
- Cracks in an acrylic bath
Bath repair in Bintree, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include damage beneath the taps and rust by the waste and overflow, on pressed steel enamel, roll-top & freestanding and acrylic.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Bintree (NR20)
- Region
- Norfolk
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Covering Bintree
Bintree is about 7 miles north of Dereham, in Norfolk. Anywhere in NR20, we come to you. We cover 797 places across Norfolk, from the larger towns to small villages.
All of NR20 is within our area. From The Street, Church Road and Church Lane or anywhere nearby, we can come to you. We also cover the places around Bintree: Twyford (1 mile north-west), Guist (2 miles north-west), Billingford (2 miles south), Worthing (3 miles south-west) and North Elmham (3 miles south-west). Further out, we also cover Dereham (7 miles south), Wymondham (15 miles south), Sheringham (15 miles north-east), Watton (15 miles south-west), Hethersett (14 miles south-east) and Heigham (15 miles south-east).
Near you in Bintree
Around Bintree, we work in homes near Foulsham Primary School Academy and Church of St Swithin. A little further out are Morley Castle (3.7 miles south). For a walk, there is Foxley Wood.
Aftercare tips
So the finish stays in good condition for years:
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Towns and villages near Bintree
Also in Bintree
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When a repair is not the answer
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for two to three hours for most chips. Before we go, we will explain when it can be used and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the following day, the bath is ready to use.
Getting ready for the visit
- Tell us about parking, stairs or access
- Open a window if you can
- Clear the area around the damage
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Access to the area
- What kind of damage it is
- How hard the colour is to match
- How many areas need work
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Whether it’s been repaired or coated before
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We carry out planned and one-off repairs for housing associations and facilities teams in Norfolk and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
What we are called out for in Bintree
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
The things clients usually mention when they call are:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
Before booking anyone
- Whether the colour is mixed to match
- How to care for the finish
- The length of the guarantee and what it covers
- What happens if the damage is worse than the pictures show
Bintree questions
How much does bath repair cost in Bintree?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you work in Bintree?
Yes. We cover the entire UK and travel to Bintree. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens next?
You’ll get a fixed quote back. You are under no obligation.
Do you cover the entire of Norfolk?
Everywhere in the UK, Bintree included. Travel is included in the price.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before.
About our accreditations · Every repair comes with a one-year guarantee.
