Norfolk · England
Bath chip & crack repair in Guist, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Guist. Free, fixed quotes from your pictures.
- Repairs from £95
- A chipped rim or side
- A hole punched through by something heavy
Bath repair at your home in Guist
A typical bath repair is a few hours’ work, and you can usually bathe again the next day. You will not need a plumber or tiler, because the bath does not move. If you’re dealing with rust spots around the plughole and damage beneath the taps, we can typically put it right, whatever the material.
Every job is backed for twelve months in Guist and everywhere else. We return to put right any problem with the work.
- Location
- Guist (NR20)
- Area hub
- Norfolk
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Guist: your questions answered
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you cover the whole of Norfolk?
We work UK-wide. Our prices are the same everywhere.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. You’ll see the full price before you book.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Something in shot to show the size
- One sharp close-up of the damage
- Details of any past repairs
- Natural light rather than flash
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Places near Guist
Other services in Guist
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we’ll talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the following day, the bath is ready to use.
How to prepare
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Advice
Our work in Guist
Guist is about 8 miles north of Dereham, in Norfolk. Anywhere in NR20, a technician comes to you. We cover 797 places in Norfolk, from the larger towns to small villages.
Here we cover the NR20 postcode area. Local streets include Malthouse Lane, Holt Road and Bridge Road. If you are just outside Guist, we cover Twyford (1 mile south-east), Bintree (2 miles south-east), North Elmham (3 miles south), Billingford (3 miles south) and Worthing (4 miles south). Within a short drive, we also cover Dereham (8 miles south), Sheringham (15 miles north-east), Swaffham (15 miles south-west), Taverham (12 miles south-east), Fakenham (6 miles north-west) and Aylsham (12 miles east).
Landmarks near Guist
Typical jobs here are in homes near Church of St Andrew and the streets around them. Green spaces nearby include Pensthorpe Nature Reserve.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Check that an acrylic bath does not move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
When to call us in Guist
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
You may need us if you’ve spotted any of these:
- Snagging damage from a refit
- A cracked acrylic bath
- Impact holes in acrylic
- A kit repair that didn’t last
Comparing quotes
- Whether a trained technician does the job
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- How the colour is matched
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
When a repair is not the answer
It helps to know what we can’t do:
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
