Wrexham · Wales

Bath chip & crack repair in Black Park, Wrexham

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Black Park and across Wrexham. Send pictures for a free, fixed quote.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Black Park

Covering Black Park

Black Park is about 4 miles south of Rhosllannerchrugog, in Wrexham. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Black Park is one of 115 places in Wrexham where we work. Our nearest city page is Liverpool, about 32 miles away.

Here we cover the LL14 postcode area. Neighbouring places we cover include Halton (1 mile south), Y Waun (1 mile south-west), Newbridge (1 mile north-west), Chirk (2 miles south) and Cefn-bychan (2 miles north-west). Within a short drive, we also cover Wrexham (7 miles north), Caia Park (7 miles north-east), Offa (6 miles north), Rhosllannerchrugog (4 miles north), Rhosddu (7 miles north) and Acton (8 miles north).

Landmarks near Black Park

Around Black Park, we work in homes near Pentre Church in Wales Controlled Primary School, Halton Former Mission Church and The Land. Black Park’s nearest station is Chirk station, about 1.8 miles south-west of the centre. Well-known places in the area include Cae y Castle (1.3 miles north-east) and Cefn Mawr and District Museum (1.8 miles north-west). Open spaces near Black Park include Chirk Green Hill and The Lake.

Map of Black Park © OpenStreetMap contributors

Bath repair at your home in Black Park

A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Whether it’s chips under the taps and rust spots around the plughole, we can typically put it right, whatever the material.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Black Park (LL14)
County
Wrexham
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

Black Park questions

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Is there a guarantee?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we will plan for it.

Do you cover Black Park?

Yes. We work across the UK and travel to Black Park and the rest of Wrexham. Send us photos for a fixed quote, or call 0345 017 0787.

Can you repair several things at once?

Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.

Will I be able to see the repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Are there extra charges for Black Park?

Travel is included in the price, and we charge the same wherever you are.

Repairing versus replacing in Black Park

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Our prices are the same across the UK, with no extra for Black Park. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Black Park clients choose us

  • Repair technicians who travel to you, UK-wide
  • No extra charge for your area
  • Colour mixed on the day to match
  • Most jobs done in one visit

Take a look at our prices page and bath cost comparison.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For landlords and businesses

For anyone letting property in or around Black Park, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Common problems we fix in Black Park

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

These are the problems we are asked about most:

  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic
  • A chip where the taps sit
  • Snagging damage from a refit

Comparing quotes

  • A fixed price, and whether VAT is included
  • How soon you can use it again
  • How long the guarantee is and what it covers
  • Whether the price covers travel

Our hiring checklist

How the visit works

You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. It usually takes a few hours, and you’re welcome to carry on with your day while we work.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the following day.

Before we arrive

  • Have a window or extractor fan available
  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive

Get a quote

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Related advice

When we would advise against a repair

We won’t take on work that will not last, so here’s what a repair cannot put right:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • Wear across the whole surface, which needs re-enamelling

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel

Prices and what affects them

Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:

  • The material
  • How hard the colour is to match
  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out

The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • A close-up of the damage, in focus
  • Details of any past repairs
  • A wider photo showing the whole bath
  • Any details about the material

Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Black Park, and we will reply with a fixed quote.

Keeping it looking good

Looking after the surface is easy:

  • Keep metal cans and razors off the surface
  • Give the bath a quick rinse after use
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Check that an acrylic bath does not move when you stand in it

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.