Lancashire · England
Bath chip & crack repair in Blackleach, Lancashire
Bath repair across Blackleach and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Hairline or through cracks in acrylic
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Bath repair in Blackleach without replacing anything
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Common call-outs are for a cracked acrylic bath and chips caused by builders, on roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Blackleach (PR4)
- Area hub
- Lancashire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What happens on the day
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. Allow two to three hours for most chips.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Advice
When to call us in Blackleach
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things customers usually mention when they call include:
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
Questions to ask before booking
- Whether the price is fixed and includes VAT
- What preparation is included
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
Blackleach and the surrounding area
Blackleach is about 3 miles north-west of Fulwood, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Blackleach is one of 482 towns and villages in Lancashire we cover. You can also see our page for Liverpool, about 28 miles away.
We work across the PR4 postcode area and the streets around it. Whether you live on Roots Lane and Blackleach Lane or a nearby road, we can come to you. We also travel to Swillbrook (1 mile east), Catforth (1 mile north), Black Pole (1 mile north-east), Woodsfold (1 mile north) and Lewth (1 mile north). Larger places within reach include Preston (5 miles south-east), Chorley (13 miles south-east), Lytham St Anne's (9 miles south-west), Bamber Bridge (7 miles south-east), Leyland (9 miles south-east) and Fulwood (3 miles south-east).
Around Blackleach
Around Blackleach, we work in homes near The Bay Horse pub and Catforth Primary School, among other places. Blackleach’s nearest station is Salwick station, roughly 1.8 miles south-west. Nearby you will also find Royal Preston Hospital (3.6 miles east) and Church Cottage (3.2 miles east).
Places near Blackleach
More services for Blackleach
Common questions in Blackleach
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do you come to Blackleach?
We do. Repair technicians travel to Blackleach from across the region, with no extra charge for travel.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- How much damage there is
- What the surface is made of
- How easy the damage is to reach
- Unusual colours or finishes
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your pictures
Most quotes are done from photos alone. To help us price it:
- One picture of the entire bath
- Natural light rather than flash
- The material, if you know it
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What we can’t put right
In fairness, there are a few things a repair will not fix:
- Wear across the entire surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
