Lancashire · England
Bath Repair for Black Pole homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Black Pole, with a one-year guarantee on every repair.
- Repairs from £95
- A kit repair that didn’t last
- Rusty patches near the plughole
Bath repair in Black Pole without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for cracks in an acrylic bath and scratches you can feel with a fingernail, across acrylic, cast iron enamel and whirlpool & spa baths.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Black Pole (PR4)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Black Pole
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
When to call us in Black Pole
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Deep scratches in acrylic
- A failed DIY repair that’s discoloured or lifting
- Damage done while the bathroom was being fitted
Questions to ask before you book
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
Prices and what affects them
Repairs from £95. There’s no charge for travel to Black Pole. The price depends on:
- What the surface is made of
- How much damage there is
- The colour and finish to match
- Whether we combine several jobs
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
To get a price, send two or three pictures using our quote form or call us. We will say immediately whether it can be repaired.
Also near Black Pole
Also in Black Pole
Honest limits
It helps to know what we can’t do:
- Cracks in parts of an acrylic bath we cannot get to from below
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Black Pole
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How to look after the repair
To keep it looking its best for years:
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
- Store metal items away from the bath
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Rooms protected and left tidy
- Same prices wherever you are
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
Take a look at our prices page and bath cost comparison.
Landlords, agents and businesses in Black Pole
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Advice
Where we work around Black Pole
Black Pole is about 3 miles north-west of Fulwood, in Lancashire. Across the PR4 area, we come to you. We work in 482 places across Lancashire, from the larger towns to small villages. Our jobs stretch from Black Pole to Liverpool (29 miles away).
Our visits in PR4 are booked in the same way as anywhere else. Jobs here include addresses on Eaves Lane and Lewth Lane and the roads around them. Neighbouring places we cover include Lewth (1 mile north-west), Catforth (1 mile south-west), Cuddy Hill (1 mile north), Woodsfold (1 mile west) and Woodplumpton (1 mile south-east). Further out, we also cover Preston (5 miles south-east), Chorley (13 miles south-east), Lytham St Anne's (11 miles south-west), Bamber Bridge (8 miles south-east), Leyland (9 miles south) and Fulwood (3 miles south-east).
Landmarks near Black Pole
Locally, our jobs take us to homes close to Catforth Primary School, Broughton High School and The Plough at Eaves pub. The nearest railway station is Salwick station, about 3.2 miles south-west. Well-known places in the area include Preston Castle (4.3 miles south-east) and Church Cottage (2.7 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
