Bolton · England
Bath chip & crack repair in Blackrod, Bolton
Problem with your bath in Blackrod? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Bath repair in Blackrod without replacing anything
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. If you’re dealing with a chipped rim or side and cracks in an acrylic bath, we can usually put it right, whatever the material.
Every repair comes with a one-year guarantee, wherever you are in Bolton.
- Where
- Blackrod (BL6)
- Area hub
- Bolton
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Blackrod
Also in Blackrod
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Colour-matched on site
- One price list for the whole UK
- Work done at your home or business
- A fixed quote before you book
See our prices page and bath cost comparison.
Looking after it afterwards
To keep it looking its best:
- Do not scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Where we work around Blackrod
Blackrod is about 2 miles west of Horwich, in Bolton. Across the BL6 area, we come to you. Blackrod is one of 61 towns and villages in Bolton where we work. Our jobs stretch from Blackrod to Manchester (17 miles away).
All of BL6 is within our area. We regularly work on streets such as Station Road, Boardman Street and Rivington Street and the roads around them. Blackrod is on the B5408, so it’s easy for us to reach. Nearby, we also work in Little Scotland (1 mile west), Haigh (1 mile south-west), Aspull (2 miles south), Horwich (2 miles east) and Middlebrook (2 miles south-east). Larger places within reach include Bolton (6 miles east), Halliwell (5 miles east), Farnworth (8 miles south-east), Westhoughton (4 miles south-east), Daubhill (6 miles east) and Great Lever (7 miles east).
Local landmarks in Blackrod
Typical jobs here are in homes near Blackrod Anglican/Methodist Primary School, Church of St Katherine and Rivington and Blackrod High School and the streets around them. The closest station to Blackrod is Blackrod station, about 0.5 miles east of the centre. Further afield, we also cover the area around The Galleries (3.8 miles south-west) and Hindley Museum (3.9 miles south). For a walk, there’s Noon Hill.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Blackrod: your questions answered
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Common problems we fix in Blackrod
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Common reasons people in Blackrod contact us include:
- Rust spots around the plughole
- A kit repair that didn’t last
- Snagging damage from a refit
- A chip where the taps sit
Before booking anyone
- Whether the colour is mixed to match
- Whether a trained technician does the job
- What prep work is covered
- How the room is protected while they work
Landlords, agents and businesses in Blackrod
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
If you manage property in Blackrod, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
