Derbyshire · England

Bath chip & crack repair in Blackwell, Derbyshire

We travel to Blackwell for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • A chip where the taps sit
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Blackwell

How we price bath repair

Repairs from £95. We charge the same across the UK, including Blackwell. The price reflects:

  • Whether old repairs or coatings need taking off
  • The colour and finish to match
  • What the surface is made of
  • Where the damage is and how we get to it

A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.

How to get a fixed quote

You can normally get a fixed price without us visiting. To make it quick:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • A picture taken from further back
  • A clear, close picture of the problem area

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

How we handle bath repair in Blackwell

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are chips caused by builders and chips on the rim or sides.

All our work is covered by a one-year guarantee, wherever you are in Derbyshire.

Before and after: a damaged acrylic bath corner repaired in place
Area
Blackwell (DE55)
County
Derbyshire
Guarantee
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

FAQs for Blackwell

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Is a holed acrylic bath repairable?

In most cases. Photos of the hole and the underside help us check.

What happens once I’ve sent pictures?

We review the pictures and send a fixed quote and the next dates we have.

What happens if you find more damage?

Your quote covers the damage in the pictures. If there is more, we will tell you before starting.

How do I get a price for bath repair in Blackwell?

Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

How long before I can use the bath?

Normally by the following day, depending on the repair.

Can you redo an old repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • One-year guarantee on every repair
  • CHAS, Constructionline and SafeContractor accredited
  • No extra charge for your area
  • Colour mixed on the day to match

Read our prices page or bath cost comparison.

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Water coming from the waste or taps rather than the bath
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

How the visit works

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips, and we’ll keep you posted as we go.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Keep a parking space free if you can
  • Tell us about parking, stairs or access

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Read more

What we’re called out for in Blackwell

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

The things clients normally mention when they call are:

  • Chips caused by builders
  • Rust spots around the plughole
  • Cracks in an acrylic bath
  • Chips on the rim or sides

What your quote should include

  • What aftercare is recommended
  • What prep work is covered
  • Whether they match the colour on site
  • How changes to the job are handled

Our hiring checklist

About Blackwell

Blackwell is about 4 miles west of Sutton in Ashfield, in Derbyshire. Our technicians come to homes and businesses in Blackwell, so you do not need to take anything anywhere. Blackwell is one of 532 places in Derbyshire we cover. Our nearest city page is Manchester, about 43 miles away.

Our visits in DE55 work the same way as everywhere else we cover. We regularly work on streets such as Woburn Close, Alfreton Road and Central Drive. We also cover the places around Blackwell: Westhouses (1 mile west), Church Hill (1 mile east), Newton (1 mile north-east), Hilcote (1 mile east) and South Normanton (1 mile south-east). Further out, we also cover Chesterfield (9 miles north), Ilkeston (10 miles south), Belper (8 miles south-west), Heanor (7 miles south), Dronfield (13 miles north) and Ripley (5 miles south).

Near you in Blackwell

In Blackwell, that means homes near Church of St Werburgh, George and Dragon pub and Blackwell Community Primary and Nursery School and the streets around them. The closest station to Blackwell is Alfreton station, about 1.5 miles south-west. Further afield, we also cover the area around Clay Cross Hospital (4 miles north-west) and John King Workshop Museum (2.6 miles south-east).

Map of Blackwell © OpenStreetMap contributors

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Get a dripping tap fixed promptly
  • If an acrylic bath flexes, have its feet adjusted
  • Clean with warm water and a mild detergent
  • Have new chips seen to early

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.