Somerset · England
Bath chip & crack repair in Bladon, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths in Bladon, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- Chips under the taps
Bladon questions
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What happens once I’ve sent photos?
You’ll get a fixed quote back, generally with dates to choose from. There’s no obligation to book.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
How much does bath repair cost in Bladon?
Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Bath repair in Bladon, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Typical jobs include rusty patches near the plughole and hairline or through cracks in acrylic, in pressed steel enamel, roll-top & freestanding and cast iron enamel.
Every repair is covered by our one-year guarantee, wherever you are in Somerset.
- Area
- Bladon (TA12)
- Region
- Somerset
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. You can expect it to take a few hours, depending on the damage, and we’ll keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Let us know which floor the room is on
How to get a price
Send us a picture of the damage and one of the whole item, with your TA12 postcode, and we will reply with a fixed quote.
Related advice
Do you need bath repair in Bladon?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- Cracks in an acrylic bath
Comparing quotes
- A fixed quote, and whether VAT is included
- What aftercare is recommended
- Whether they match the colour on site
- How changes to the job are handled
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Clean with warm water and a mild detergent
- Store metal items away from the bath
- Do not leave a fresh chip for long
- Put a towel in the bath if you are working above it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Work for landlords and builders
If you manage property in Bladon, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Landlords, letting agents and housing providers in Bladon use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What we can’t put right
It helps to know what we cannot do:
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think.
Materials we work on in Bladon
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Towns and villages near Bladon
Other services in Bladon
Repair or replace in Bladon?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Bladon clients choose us
- One price list for the whole UK
- Free fixed quotes from pictures
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
Read our pricing and guide to resurfacing and replacement costs.
Where we work around Bladon
Bladon is about 8 miles west of Yeovil, in Somerset. From the centre of Bladon to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Bladon is one of 640 towns and villages in Somerset where we work.
Every address in TA12 is within our area, from the main roads to the quietest streets. We also cover the places around Bladon: Kingsbury Episcopi (1 mile north-east), Stembridge (1 mile south-west), Lower Burrow (1 mile west), East Lambrook (1 mile south) and West Lambrook (2 miles south-west). Larger places within reach include Taunton (13 miles west), Bridgwater (13 miles north-west), Yeovil (8 miles east), Chard (10 miles south-west), Street (10 miles north) and Glastonbury (12 miles north).
Local landmarks in Bladon
Our clients here include homes close to Kingsbury Episcopi Methodist Church, Kingsbury Episcopi Primary School and The Rusty Axe pub, among other places. Open spaces near Bladon include West Sedgemoor RSPB reserve and Ham Hill.
Prices and what affects them
Prices start from £95. There is no charge for travel to Bladon. The price depends on:
- What the surface is made of
- Where the damage is and how we get to it
- How hard the colour is to match
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Where you are, by postcode
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
