Somerset · England
Bath chip & crack repair in East Lambrook, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in East Lambrook, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage beneath the taps
About East Lambrook
East Lambrook is about 7 miles west of Yeovil, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. East Lambrook is one of 640 places in Somerset we cover.
Here we cover the TA13 postcode area. Streets in the area include Silver Street and Middle Street. We also travel to Stembridge (1 mile north-west), West Lambrook (1 mile west), South Petherton (1 mile south), Bladon (1 mile north) and Lower Burrow (1 mile north-west). Larger places within reach include Taunton (13 miles west), Bridgwater (14 miles north-west), Yeovil (7 miles east), Chard (9 miles south-west), Street (11 miles north) and Glastonbury (13 miles north).
What’s near East Lambrook
Typical jobs here are in homes near Kingsbury Episcopi Primary School, Rose And Crown Inn and Church of St James and the streets around them. A little further out are Crewkerne Community Hospital (5.9 miles south). Open spaces near East Lambrook include Ham Hill.
About our bath repair in East Lambrook
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on whirlpool & spa baths, acrylic and pressed steel enamel, and common reasons people contact us are an old repair that has yellowed or come loose and chips under the taps.
Your repair is guaranteed for a year, as with every job we do.
- Location
- East Lambrook (TA13)
- County
- Somerset
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What happens on the day
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Ask for a price
Upload a picture of the damage and one of the whole item, and tell us you’re in East Lambrook, and we will come back with a fixed quote.
Advice
Common questions in East Lambrook
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you work in East Lambrook?
Yes. We cover the whole UK and travel to East Lambrook and the rest of Somerset. Send us photos for a fixed quote, or call 0345 017 0787.
What areas do you cover?
The entire UK, including all of Somerset. Send your postcode with your photos and we’ll offer you dates.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
How much does bath repair cost in East Lambrook?
Repairs from £95. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your TA13 postcode.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What affects the price in East Lambrook
Prices start from £95. Every quote is fixed and free. What we look at:
- The material and finish
- Whether old repairs or coatings need taking off
- The type of damage
- How hard the colour is to match
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed quote
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- Details of any past repairs
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- Work done at your home or business
- Same prices wherever you are
- A fixed quote before booking
- CHAS and Constructionline accredited
See our full price list and guide to resurfacing and replacement costs.
Signs you need bath repair in East Lambrook
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Clients usually contact us about:
- Rust spots around the plughole
- A chip where the taps sit
- Chips caused by builders
- Cracks in an acrylic bath
Before you book anyone
- The length of the guarantee and what it covers
- Whether they match the colour on site
- When it can be used again
- What happens if they find more damage
Places near East Lambrook
More services for East Lambrook
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
- Give the bath a quick rinse after use
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we cannot put right
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
Materials we work on in East Lambrook
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
