Hampshire · England
Bath Repair in Blissford
Our technicians come to Blissford for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A hole punched through by something heavy
- Chips along the edge of the bath
About our bath repair in Blissford
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We work on pressed steel enamel, acrylic and roll-top & freestanding, and common reasons people get in touch are rust by the waste and overflow and damage done while the bathroom was being fitted.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Blissford (SP6)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Blissford
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- Rust by the waste and overflow
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Before booking anyone
- What preparation is included
- How long the guarantee is and what it covers
- How to care for the finish
- What happens if the damage is worse than the pictures show
How to look after the repair
Looking after the surface is easy:
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Why repair rather than replace?
Replacing a fitted bath generally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Blissford. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Blissford clients choose us
- Dust sheets down, tidy finish
- Everything repaired in place
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
See our pricing or guide to resurfacing and replacement costs.
How the visit works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips. Before we go, we’ll explain when it can be used and how to care for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
- Tell us if there are stairs or a lift
Get a quote
Email us photos of the damage and one of the entire item, with your SP6 postcode, and we’ll reply with a fixed price.
Related advice
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price depends on:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Access to the area
- Unusual colours or finishes
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Places near Blissford
More services for Blissford
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Our work in Blissford
Blissford is about 6 miles north-east of Verwood, in Hampshire. We visit homes and businesses in Blissford and the surrounding area, so there’s no workshop to go to. Blissford is one of 683 towns and villages in Hampshire we cover.
We work across SP6 and the streets around it. That includes homes on Blissford Hill, Blissford Cross and Abbots Well Road and the roads around them. We also travel to Frogham (1 mile south), Hyde (1 mile south-west), Hungerford (1 mile south-west), Stuckton (1 mile west) and Criddlestyle (1 mile north-west). Further out, we also cover Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east), New Milton (12 miles south), Ringwood (5 miles south) and Barton on Sea (13 miles south).
Around Blissford
Typical jobs here are in homes near The Burgate School and Sixth Form, The Fighting Cocks pub and Hyde Church of England Primary School. Further afield, we also cover the area around Fordingbridge Doll Museum (1.6 miles west) and Godshill Castle Hill (1.8 miles north). Green spaces nearby include Blashford Lakes and Linbrook Lake.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Your questions about bath repair in Blissford
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What areas do you cover?
We work UK-wide, so Blissford is covered. Our prices are the same everywhere.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
When can I have a bath again?
Usually within a day, though it depends on what we’ve done.
About our accreditations · Every repair comes with a one-year guarantee.
