Cumbria · England
Bath Repair for Blitterlees homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Blitterlees and across Cumbria. Send pictures for a free, fixed quote.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips along the edge of the bath
What we can’t put right
It helps to know what we can’t do too:
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
About our bath repair in Blitterlees
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, we can usually put it right, whatever the material.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Blitterlees (CA7)
- County
- Cumbria
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Places near Blitterlees
More services for Blitterlees
Questions from Blitterlees
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Blitterlees and the surrounding area
Blitterlees is about 11 miles south-west of Annan, in Cumbria. Jobs in Blitterlees are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Blitterlees is one of 438 places in Cumbria where we work. We work right across the region, from Blitterlees to Newcastle upon Tyne (70 miles away).
Postcode districts we cover here: CA7. Neighbouring places we cover include Greenrow (1 mile north-east), Silloth (1 mile north), Skinburness (2 miles north), Abbeytown (4 miles east) and Allonby (6 miles south). Further out, we also cover Maryport (11 miles south-west), Cockermouth (13 miles south), Wigton (9 miles east), Seaton (15 miles south), Ewanrigg (11 miles south) and Aspatria (7 miles south).
What’s near Blitterlees
Around Blitterlees, we work in homes near Cumberland Inn, Solway Community School and Christ Church and the streets around them. A little further out are Soldiers in Silloth (1.1 miles north) and Moated site of Wolsty Castle (0.9 miles south).
Aftercare tips
After the repair has cured, a few habits help it last:
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
- Stick to mild cleaners and a soft cloth
- Make sure an acrylic bath is firm underfoot
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Blitterlees customers choose us
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- A fixed quote before booking
- Colour-matched on site
Take a look at our prices page or resurfacing vs replacement cost guide.
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we take into account:
- How hard the colour is to match
- Where the damage is and how we get to it
- How much damage there is
- Any earlier repairs that need removing first
We charge the same wherever you are, so there is no premium for Blitterlees. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Landlord and trade work in Blitterlees
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
