Shropshire · England

Bath chip & crack repair in Blymhill Common, Shropshire

Bath repair for Blymhill Common, without a refit. Get a fixed price from your photos, then we come to you.

  • Repairs from £95
  • Rusty patches near the plughole
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Blymhill Common

Bath repair in Blymhill Common, done in place

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and the jobs we see most are chips along the edge of the bath and rust by the waste and overflow.

Whatever the size of the job, it’s backed by a one-year guarantee in Blymhill Common and across Shropshire.

Location
Blymhill Common (TF11)
Area hub
Shropshire
Guarantee
12 months on all our work
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

What a repair cannot fix

In fairness, there are a few things a repair will not fix:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we can’t get to from below
  • Rust that has eaten right through a steel bath

If in doubt, send pictures and we will say what we think.

Materials we work on in Blymhill Common

  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic

What your bath is made of matters

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.

What bath repair costs

Prices start from £95. Each job gets its own fixed price. These are the things that affect it:

  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • The material

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Send pictures for a quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A wider photo showing the whole bath
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Common problems we fix in Blymhill Common

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

If you can see any of these, send us a picture:

  • Chips under the taps
  • Holes from dropped items
  • Deep scratches in acrylic
  • A chipped rim or side

Before booking anyone

  • What preparation is included
  • How soon you can use it again
  • If travel is included in the price
  • How changes to the job are handled

Choosing a repair company

Where we work around Blymhill Common

Blymhill Common is about 5 miles south-east of Newport, in Shropshire. Customers in Blymhill Common get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 433 places in Shropshire, from the larger towns to small villages. We work right across the region, from Blymhill Common to Birmingham (about 24 miles away).

All of TF11 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Weston Heath (1 mile west), Sheriffhales (2 miles west), Lilyhurst (3 miles west), Pave Lane (3 miles north-west) and Chetwynd Aston (4 miles north-west). Larger places within reach include Madeley (8 miles south-west), Bridgnorth (13 miles south), Market Drayton (15 miles north-west), Shifnal (4 miles south-west), Broseley (10 miles south-west) and Albrighton (6 miles south).

Local landmarks in Blymhill Common

In Blymhill Common, that means homes near St Mary's Church and The Red Lion pub, among other places. The closest station to Blymhill Common is Shifnal station, roughly 4.4 miles south-west of the centre. Well-known places in the area include Tong Castle (3.4 miles south) and RAF Hospital Cosford (4.4 miles south). The countryside around Blymhill Common includes White Sitch.

Map of Blymhill Common © OpenStreetMap contributors

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Clean with warm water and a mild detergent
  • Get a dripping tap fixed promptly
  • Have new chips seen to early
  • Protect the bath with a towel when doing jobs nearby

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

What we do, step by step

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area
  • Make sure the room can be ventilated

Ask for a price

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Send pictures for a quote

Related advice

Repair or replace in Blymhill Common?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.

Why choose Surface Doctor in Blymhill Common

  • Technicians who travel to you, UK-wide
  • Every repair guaranteed for a year
  • Typically one visit, start to finish
  • No extra charge for your area

See our full price list and resurfacing vs replacement cost guide.

Common questions in Blymhill Common

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Which areas do you work in?

All of Shropshire, and the rest of the UK. There is no extra charge for travel.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Do you come to Blymhill Common?

Yes, we do. We send a technician to Blymhill Common for every job, with no extra charge for travel.

Something went through my bath. Can it be fixed?

In most cases. Photos of the hole and the underside help us check.

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

What about rust by the waste?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.