Darlington · England
Bath Repair for Bolam homes
Bath repair across Bolam and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- A chip where the taps sit
How we handle bath repair in Bolam
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. If you’re dealing with a chip where the taps sit and snagging damage from a refit, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Bolam (DL2)
- County
- Darlington
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Bolam
Bolam is about 4 miles south of Bishop Auckland, in Darlington. From the centre of Bolam to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Bolam is one of 53 places in Darlington where we work. You can also see our page for Newcastle upon Tyne, about 27 miles away.
Our visits in DL2 work the same way as everywhere else we cover. Nearby, we also work in Houghton-le-Side (2 miles east), Summerhouse (2 miles south), Denton (3 miles south-east), Walworth Gate (3 miles south-east) and Heighington (3 miles east). We also work in nearby towns such as Darlington (7 miles south-east), Harrowgate Hill (7 miles south-east), West Park (6 miles south-east), Eastbourne (8 miles south-east), Cockerton (7 miles south-east) and Rise Carr (7 miles south-east).
Landmarks near Bolam
Around Bolam, we work in homes near St Andrew's Church, among other places. The closest station to Bolam is Shildon station, roughly 3.1 miles north-east. Further afield, we also cover the area around Bishop Auckland Hospital (4.1 miles north) and Walworth Castle (3.3 miles south-east).
Nearby places to Bolam
More services for Bolam
What we can’t put right
Some jobs are not right for a repair, for example:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Bolam. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Bolam customers choose us
- Colour-matched on site
- A fixed quote before booking
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Read our prices page and guide to resurfacing and replacement costs.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Point us to the nearest place to park
- Open a window if you can
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
What affects the price in Bolam
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- The material
- How many areas need work
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Bolam: your questions answered
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Bolam, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Keeping it looking good
It’s all simple stuff:
- Have new chips seen to early
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Ensure an acrylic bath is firm underfoot
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
