Lancashire · England

Bath chip & crack repair in Bolton Green, Lancashire

We travel to Bolton Green for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Rusty patches near the plughole
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Bolton Green

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, and we finish by cleaning up and talking you through the result.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can usually use the bath the following day.

Before we arrive

  • Open a window if you can
  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work

Getting a price

To get a price, send two or three photos using our quote form or call us. We will say right away whether it can be repaired.

Send pictures for a quote

Advice

How we handle bath repair in Bolton Green

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Whether it’s damage done while the bathroom was being fitted and rusty patches near the plughole, we can generally put it right, on pressed steel enamel, roll-top & freestanding and acrylic alike.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Where
Bolton Green (PR7)
Region
Lancashire
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Honest limits

A few problems are outside what a surface repair can do:

  • Flexing caused by a failed cradle or loose feet
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send photos and we’ll say what we think.

Materials we work on in Bolton Green

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel

Signs you need bath repair in Bolton Green

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.

Send us a picture if you notice any of these:

  • Hairline or through cracks in acrylic
  • Snagging damage from a refit
  • Scratches you can feel with a fingernail
  • Chips on the rim or sides

What your quote should include

  • How soon you can use it again
  • Whether a trained technician does the job
  • What protection goes down before work starts
  • What happens if the damage is worse than the pictures show

Our hiring checklist

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Where we work around Bolton Green

Bolton Green is about 2 miles west of Chorley, in Lancashire. Our technicians come to clients in Bolton Green, so nothing has to leave your home. Bolton Green is one of 482 places in Lancashire we cover. You can also see our page for Liverpool, about 20 miles away.

Our technicians cover all of PR7. Streets in the area include Back Lane and Preston Road, and we cover them all. We also cover the places around Bolton Green: Pincock (1 mile north-east), Euxton (1 mile north), Charnock Richard (1 mile south), Astley Village (1 mile north-east) and Runshaw Moor (2 miles north-west). Further out, we also cover Preston (8 miles north), Lytham St Anne's (15 miles north-west), Bamber Bridge (5 miles north), Accrington (15 miles north-east), Leyland (3 miles north) and Fulwood (9 miles north).

What’s near Bolton Green

In Bolton Green, that means homes near Euxton Hall Chapel, Balshaw Lane Community Primary School and Parklands High School. The nearest railway station is Euxton Balshaw Lane station, roughly 0.5 miles north-east. Other landmarks nearby include Chorley and South Ribble District General Hospital (1.9 miles north-east) and British Commercial Vehicle Museum (2.9 miles north). Not far away are Healey Nab.

Map of Bolton Green © OpenStreetMap contributors

Bolton Green questions

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Do you come to Bolton Green?

Yes. We cover the entire UK and travel to Bolton Green. Send us photos for a fixed quote, or call 0345 017 0787.

Can you repair a hole in a bath?

Usually. Photos of the hole and the underside help us check.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is a bath repair durable?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Bolton Green use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Repair or replace in Bolton Green?

Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Bolton Green

  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job
  • A year’s guarantee on all work

See our prices page and guide to resurfacing and replacement costs.

How we price bath repair

Repairs from £95. We charge the same across the UK, including Bolton Green. What changes the price is:

  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • The material
  • What kind of damage it is

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Quotes from your pictures

It only takes a minute to photograph the damage. Try to send:

  • One picture of the entire bath
  • Details of any past repairs
  • Natural light rather than flash
  • Where you are, by postcode

Send us a picture of the damage and a wider shot of the whole item, with your PR7 postcode, and we will come back with a fixed quote.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Do not leave razors or cans standing in the bath
  • Ensure an acrylic bath is firm underfoot
  • Do not scrub with anything abrasive
  • Use a soft cloth and washing-up liquid for everyday cleaning

A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.