Lancashire · England
Bath chip & crack repair in Pincock, Lancashire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Pincock. Send pictures for a free, fixed quote.
- Repairs from £95
- A hole punched through by something heavy
- Cracks in an acrylic bath
Bath repair in Pincock, done in place
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on acrylic, pressed steel enamel and cast iron enamel, and the jobs we see most are an old repair that has yellowed or come loose and a cracked acrylic bath.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Pincock (PR7)
- Region
- Lancashire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. We price every job individually, from your pictures. What matters most is:
- Access to the area
- How many items we do on one visit
- The material
- Unusual colours or finishes
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
For a price in Pincock, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Places near Pincock
Also in Pincock
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Signs you need bath repair in Pincock
A cracked acrylic bath typically wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
If you can see any of these, send us a picture:
- Chips on the rim or sides
- Impact holes in acrylic
- Damage beneath the taps
- Deep scratches in acrylic
What to look for in a quote
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- How the colour is matched
- Aftercare advice
Your questions about bath repair in Pincock
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Are there extra charges for Pincock?
Travel is included in the price, with the same prices everywhere we work.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
We review the pictures and send a fixed quote.
How do I get a price for bath repair in Pincock?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Our work in Pincock
Pincock is about 2 miles west of Chorley, in Lancashire. From the centre of Pincock to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 482 places across Lancashire. We work right across the region, from Pincock to Liverpool (20 miles away).
We cover every part of the PR7 postcode area and the streets around it. We regularly work on streets such as Dunrobin Drive, Wigan Road and Dunnock Drive. Neighbouring places we cover include Bolton Green (1 mile south-west), Euxton (1 mile north), Astley Village (1 mile east), Runshaw Moor (1 mile north-west) and Charnock Richard (2 miles south). Larger places within reach include Preston (8 miles north), Lytham St Anne's (15 miles north-west), Bamber Bridge (5 miles north), Accrington (14 miles north-east), Leyland (3 miles north) and Fulwood (9 miles north).
What’s near Pincock
Typical jobs here are in homes near Balshaw Lane Community Primary School, Euxton Hall Chapel and Parklands High School and the streets around them. Pincock has its own railway station: Euxton Balshaw Lane station. Well-known places in the area include British Commercial Vehicle Museum (2.7 miles north) and Chorley and South Ribble District General Hospital (1.7 miles east). Not far away are Healey Nab.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Pincock as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How it works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Before we arrive
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Related advice
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
