Hampshire · England
Bath chip & crack repair in Borden, Hampshire
Bath repair in and around Borden: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Damage beneath the taps
How we handle bath repair in Borden
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because the bath doesn’t move. If you are dealing with a cracked acrylic bath and a hole punched through by something heavy, we can usually put it right.
You get a one-year guarantee, the same in Borden as everywhere else we work.
- Location
- Borden (GU30)
- County
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Also near Borden
What else we do in Borden
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Common questions in Borden
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you work in Borden?
Yes. We cover the entire UK and travel to Borden and the rest of Hampshire. Send pictures and we’ll quote, or call 0345 017 0787.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How many items we do on one visit
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
- The material, if you know it
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Borden and the surrounding area
Borden is about 5 miles east of Petersfield, in Hampshire. Wherever you are in the GU30 postcode area, we come to you. We cover 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Borden to London (about 46 miles away).
Our visits in GU30 work the same way as everywhere else we cover. We also travel to Trotton Marsh (1 mile east), Rogate (1 mile south-west), Chithurst (1 mile south-east), Milland (2 miles north-east) and Rake (2 miles north-west). Further out, we also cover Havant (13 miles south-west), Horndean (11 miles south-west), Alton (11 miles north-west), Waterlooville (13 miles south-west), Petersfield (5 miles west) and Purbrook (14 miles south-west).
Near you in Borden
Our customers here include homes close to Church of St Peter, among other places. The closest station to Borden is Liss station, about 3.6 miles north-west. Well-known places in the area include Midhurst Community Hospital (4.1 miles south-east). Not far away are Wheeler's Down and Iping and Stedham Commons.
Signs you need bath repair in Borden
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
These are the problems we are asked about most:
- Snagging damage from a refit
- Rust spots around the plughole
- Chips under the taps
- Chips on the rim or sides
Comparing quotes
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- Whether the colour is mixed to match
- How soon you can use it again
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Same prices wherever you are
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Generally one visit, start to finish
Read our prices page or guide to resurfacing and replacement costs.
What happens on the day
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the day after, the bath is ready to use.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
