Hampshire · England
Bath Repair for Rogate homes
Local bath repair for Rogate: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Scuffs and scratches in the surface

About our bath repair in Rogate
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s hairline or through cracks in acrylic and deep scratches in acrylic, we can normally put it right, on acrylic, roll-top & freestanding and pressed steel enamel alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

- Location
- Rogate (GU31)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Do not scrub with anything abrasive
- Cover the bath during DIY or decorating
- Have new chips seen to early
- Rinse it down after each bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Also near Rogate
Other services in Rogate
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
Covering Rogate
Rogate is about 4 miles east of Petersfield, in Hampshire. Whether you are in the middle of Rogate or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 683 places across Hampshire. Our nearest city page is London, about 47 miles away.
Postcode districts we cover here: GU31. From Red House Court, Habin Hill and Parsonage Estate or anywhere nearby, a technician can come to you. Neighbouring places we cover include Borden (1 mile north-east), Trotton Marsh (2 miles north-east), Hill Brow (2 miles north-west), Chithurst (2 miles east) and Durford Wood (2 miles north-west). Further out, we also cover Havant (12 miles south-west), Horndean (10 miles south-west), Alton (11 miles north-west), Waterlooville (12 miles south-west), Petersfield (4 miles west) and Purbrook (12 miles south-west).
Near you in Rogate
Our clients here include homes close to The Parish Church of St Bartholomew and Rogate CofE Primary School. For rail, the closest station is Liss station, about 3.2 miles north-west. Further afield, we also cover the area around Bear Museum (3.7 miles west) and Petersfield Community Hospital (4 miles west). Not far away are Iping and Stedham Commons and Wheeler's Down.
Signs you need bath repair in Rogate
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Look out for any of the following:
- Damage done while the bathroom was being fitted
- Holes from dropped items
- Rust by the waste and overflow
- A kit repair that didn’t last
Comparing quotes
- What happens if they find more damage
- What prep work is covered
- How long it needs to cure
- Who will actually do the work
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- The colour and finish to match
- How easy the damage is to reach
- How much damage there is
- The type of damage
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Any details about the material
- A wider photo showing the whole bath
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Landlords, agents and businesses in Rogate
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Questions from Rogate
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
What happens once I’ve sent photos?
We review the photos and send a fixed quote.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Rogate.
Something went through my bath. Can it be fixed?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
About our accreditations · Every repair comes with a one-year guarantee.

