Na h-Eileanan Siar · Scotland

Bath Repair for Borgh homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Borgh, with a one-year guarantee on every repair.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Borgh

How we handle bath repair in Borgh

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Whether it’s rust spots around the plughole and scratches you can feel with a fingernail, we can generally put it right, whatever the material.

Every repair comes with a one-year guarantee.

Before and after: a damaged acrylic bath corner repaired in place
Location
Borgh (HS2)
Area hub
Na h-Eileanan Siar
Cover
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Signs you need bath repair in Borgh

A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.

It’s worth getting a quote if you see:

  • Cracks in an acrylic bath
  • A kit repair that didn’t last
  • A chipped rim or side
  • Chips under the taps

What your quote should include

  • What the guarantee covers, and for how long
  • How the colour is matched
  • What preparation is included
  • How your room will be protected

Our hiring checklist

How it works

Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours, and we’ll tell you if anything changes.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, generally by the following day, the bath is ready to use.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access
  • Open a window if you can

Get a quote

If you’re in Borgh and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send photos for a quote

Read more

Our work in Borgh

Borgh (Gaelic: Borve) is in Na h-Eileanan Siar. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in 87 places across Na h-Eileanan Siar, from the larger towns to small villages.

Postcode districts we cover here: HS2. Jobs here include addresses on Gearra Mor and Sraid na H-Eaglaise. Other places close to Borgh include Shader (1 mile south-west), Barabhas (5 miles south-west), West Side (6 miles south-west), South Dell (6 miles north-east) and North Dell (6 miles north-east). Remote and island addresses take a little more planning, so call us to arrange it.

Map of Borgh © OpenStreetMap contributors

Materials and what they mean for the repair

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Cover the bath during DIY or decorating
  • Fix dripping taps early to stop staining and limescale
  • Stick to mild cleaners and a soft cloth
  • Don’t scrub with anything abrasive

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.

If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.

Common questions in Borgh

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Do you work in Borgh?

Yes. We cover the whole UK and travel to Borgh and the rest of Na h-Eileanan Siar. Send us pictures for a fixed quote, or call 0345 017 0787.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including pastel and older colours.

How long does the repair take to cure?

Normally by the following day, though it depends on what we have done.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Landlords, agents and businesses in Borgh

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why Borgh clients choose us

  • Every repair guaranteed for a year
  • Typically one visit, start to finish
  • We’ll tell you if it’s not worth repairing
  • Same prices wherever you are

See our pricing and guide to resurfacing and replacement costs.

Prices and what affects them

Prices start from £95. There is no area surcharge for Borgh. The price reflects:

  • The material
  • The colour and finish to match
  • Access to the area
  • How many areas need work

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Send photos for a quote

Almost every job we do is priced from pictures. This is what we need:

  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • The material, if you know it
  • One sharp close-up of the damage

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.