Na h-Eileanan Siar · Scotland
Bath chip & crack repair in Cross, Na h-Eileanan Siar
Bath repair across Cross and nearby, done in a single visit in most cases.
- Repairs from £95
- Cracks in an acrylic bath
- Rust by the waste and overflow
Bath repair at your home in Cross
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and people most often call us about rusty patches near the plughole and an old repair that has yellowed or come loose.
You get a one-year guarantee, the same in Cross as everywhere else we work.
- Where
- Cross (HS2)
- Region
- Na h-Eileanan Siar
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
When we’d advise against a repair
We will not take on work that will not last, so these are the limits:
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Cross
- We’ll tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- No extra charge for your area
- Rooms protected and left tidy
See our full price list or guide to resurfacing and replacement costs.
Common problems we fix in Cross
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a photo:
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
- A cracked acrylic bath
- A hole punched through by something heavy
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
- How changes to the job are handled
- Who turns up on the day
Aftercare tips
Simple care helps the repair last. We recommend:
- Do not leave a fresh chip for long
- Don’t scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Cross and nearby
Cross (Gaelic: Cros) is in Na h-Eileanan Siar. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 87 towns and villages in Na h-Eileanan Siar, from the larger towns to small villages.
Jobs in HS2 are booked in the same way as anywhere else. Local streets include Rathad Chros-Sgiogarstaigh, Back Street and New Street, all of which we cover. Other places close to Cross include North Dell (1 mile west), Nis (1 mile east), Ness (1 mile east), Lionel (2 miles north-east) and Lìonal (2 miles north-east). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Cross
Locally, our jobs take us to homes close to Church of Scotland, among other places. Other landmarks nearby include Dell Mill (less than half a mile west). The countryside around Cross includes Loch Langavat.
Places near Cross
More services for Cross
Cross questions
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
How do I get a price for bath repair in Cross?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the whole item and your postcode.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
How the visit works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take two to three hours for most chips.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
