Derbyshire · England
Bath chip & crack repair in Boundary, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Boundary, carried out at your home and guaranteed for a year.
- Repairs from £95
- Impact holes in acrylic
- Rust spots around the plughole
How we handle bath repair in Boundary
A typical bath repair is a few hours’ work, and you can generally bathe again the following day. You will not need a plumber or tiler, because nothing is disconnected. If you are dealing with rust by the waste and overflow and a chip where the taps sit, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Boundary (DE11)
- Region
- Derbyshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Places near Boundary
What else we do in Boundary
Questions from Boundary
How do I get a price for bath repair in Boundary?
Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
How long does the repair take to cure?
Normally by the following day, though it depends on what we’ve done.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Landlords, agents and businesses in Boundary
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Boundary clients choose us
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Colour mixed on the day to match
Take a look at our pricing or bath cost comparison.
When we’d advise against a repair
Before you book, it’s worth knowing the limits:
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Boundary
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Our work in Boundary
Boundary is about 2 miles north-west of Ashby-de-la-Zouch, in Derbyshire. Whether you are in the middle of Boundary or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 532 towns and villages in Derbyshire. Our jobs stretch from Boundary to Birmingham (26 miles away).
All of DE11 is covered. From Ashby Road and Heath Lane or a nearby road, a technician can come to you. Boundary sits on or near the A511, so getting to you is simple. We also travel to Blackfordby (1 mile south-west), Woodville (1 mile west), Hartshorne (1 mile north-west), Albert Village (2 miles west) and Moira (2 miles south-west). Within a short drive, we also cover Swadlincote (3 miles west), Long Eaton (13 miles north-east), Upper Midway (3 miles north-west), Sandiacre (14 miles north-east), Hilton (9 miles north-west) and Measham (4 miles south).
Near you in Boundary
In Boundary, that means homes near Blackfordby St Margaret's Church of England Primary School, Granville Community School and The Black Lion Public House. Other landmarks nearby include Ashby de la Zouch Museum (1.8 miles south-east) and Ashby Castle and associated formal garden (2.1 miles south-east).
What we are called out for in Boundary
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The most common problems we’re called about are:
- Rust by the waste and overflow
- Snagging damage from a refit
- Chips on the rim or sides
- Impact holes in acrylic
What to look for in a quote
- What happens if they find more damage
- Who will actually do the work
- Aftercare advice
- What preparation is included
How we price bath repair
Repairs from £95. We price every job individually, from your photos. The main factors are:
- The size and number of damaged areas
- The material and finish
- How many items we do on one visit
- The colour and finish to match
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Where you are, by postcode
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
