Northamptonshire · England
Bath Repair in Bradden
Bath repair in Bradden without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips on the rim or sides
About our bath repair in Bradden
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Common call-outs are for chips caused by builders and a hole punched through by something heavy, on pressed steel enamel, acrylic and cast iron enamel.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Area
- Bradden (NN12)
- Area hub
- Northamptonshire
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Check that an acrylic bath does not move when you stand in it
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
What happens on the day
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Keep a parking space free if you can
How to get a price
If you are in Bradden and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
More services for Bradden
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- Whether we combine several jobs
- What kind of damage it is
- Access to the area
- The size and number of damaged areas
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
Email us a picture of the damage and a wider shot of the entire item, and tell us you are in Bradden, and we’ll reply with a fixed quote.
Landlords, agents and businesses in Bradden
We work for landlords, letting agents and housing providers in Bradden as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Where we work around Bradden
Bradden is about 3 miles west of Towcester, in Northamptonshire. Jobs in Bradden are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover 364 places in Northamptonshire, from the larger towns to small villages. We work right across the region, from Bradden to Birmingham (about 42 miles away).
Our repair technicians cover all of NN12. You will find streets such as Main Street, Willows Hill and Lower End, and we cover them all. Neighbouring places we cover include Slapton (1 mile south), Abthorpe (1 mile south), Greens Norton (2 miles north-east), Blakesley (2 miles north-west) and Wappenham (2 miles south-west). Further out, we also cover Northampton (11 miles north-east), Daventry (10 miles north-west), Brackley (8 miles south-west), Towcester (3 miles east), Wolverton (11 miles south-east) and Stony Stratford (10 miles south-east).
Local landmarks in Bradden
Typical jobs here are in homes near Church of St Michael and Greens Norton Pocket Park. Well-known places in the area include The Silverstone Experience (4 miles south) and Weedon Lois Castle Mound (3 miles west).
When to call us in Bradden
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Signs it’s time to call us include:
- Deep scratches in acrylic
- Holes from dropped items
- Snagging damage from a refit
- An old repair that has yellowed or come loose
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- What aftercare is recommended
- How your room will be protected
What we can’t put right
Some jobs aren’t right for a repair, for example:
- Cracks in parts of an acrylic bath we cannot get to from below
- Rust that has eaten right through a steel bath
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Repair or replace in Bradden?
People frequently assume a cracked or chipped bath has to come out. Typically it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Dust sheets down, tidy finish
- One price list for the entire UK
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
Take a look at our prices page or guide to resurfacing and replacement costs.
Your questions about bath repair in Bradden
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
How much does bath repair cost in Bradden?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
About our accreditations · Every repair comes with a one-year guarantee.
