Staffordshire · England
Bath chip & crack repair in Branston, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Branston, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Bath repair in Branston, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for rust spots around the plughole and chips caused by builders, on whirlpool & spa baths, cast iron enamel and acrylic.
Every repair is covered by a one-year guarantee, wherever you are in Staffordshire.
- Where
- Branston (DE14)
- Region
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Branston
What else we do in Branston
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes a few hours, depending on the damage. If anything looks different from your photos, we’ll talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Ask for a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Branston and nearby
Branston is about 1 mile south-west of Burton upon Trent, in Staffordshire. Whether you’re in the middle of Branston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Branston is one of 512 towns and villages in Staffordshire where we work. Our nearest city page is Birmingham, about 24 miles away.
Postcode districts we cover here: DE14. Whether you live on Old Road, Warren Lane and Clay's Lane or anywhere nearby, we can come to you. Close by, we cover Anglesey (1 mile north-east), Stapenhill (2 miles east), Tatenhill (2 miles west), Walton-on-Trent (2 miles south) and Barton Turn (2 miles south-west). Larger places within reach include Tamworth (11 miles south), Lichfield (10 miles south-west), Rugeley (12 miles west), Burntwood (13 miles south-west), Hednesford (15 miles west) and Uttoxeter (12 miles north-west).
What’s near Branston
Around Branston, we work in homes near Paget High School, Rykneld Primary School and Stapenhill Gardens, among other places. Branston’s nearest station is Burton-On-Trent station, roughly 1.5 miles north-east. A little further out are Burton Museum (1.6 miles north-east) and Burton upon Trent Infirmary (1.4 miles north-east). For a walk, there’s Brankley Pastures.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Repair or replace: which is better?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Branston. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Honest advice, even when it means no job
- Work done at your home or business
See our full price list and bath cost comparison.
What we are called out for in Branston
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
You may need us if you’ve spotted any of these:
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- Chips on the rim or sides
Questions to ask before you book
- If travel is included in the price
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- Who turns up on the day
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The colour and finish to match
- Doing more than one item at once
- Any earlier repairs that need removing first
- The type of damage
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- The material, if you know it
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
If you’re in Branston and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Landlord and trade work in Branston
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
If you manage property in Branston, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Branston: your questions answered
Will there be a smell?
There may be a mild smell during the work.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What areas do you cover?
The whole UK, including all of Staffordshire. Send your postcode with your photos and we’ll confirm dates.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens after I send pictures?
We review the photos and send a fixed quote.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
