Greater London · England
Bath Repair in Brasted
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Brasted and across Greater London. Send photos for a free, fixed quote.
- Repairs from £95
- Rusty patches near the plughole
- Snagging damage from a refit
Landlords, agents and businesses in Brasted
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Bath repair in Brasted, done in place
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We are frequently asked to fix an old repair that has yellowed or come loose and deep scratches in acrylic, on pressed steel enamel, whirlpool & spa baths and cast iron enamel.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Brasted (TN16)
- Region
- Greater London
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Brasted and the surrounding area
Brasted is about 3 miles west of Sevenoaks, in Greater London. Jobs in Brasted are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Brasted is one of 764 towns and villages in Greater London we cover. We work right across the region, from Brasted to London (about 18 miles away).
Jobs in TN16 work the same way as everywhere else we cover. Local streets include High Street, Station Road and Watermill Close, all of which we cover. We also travel to Sundridge (1 mile east), Brasted Chart (1 mile south), Chipstead (2 miles east), Chevening (2 miles north-east) and Bessels Green (2 miles east). We also work in nearby towns such as Orpington (7 miles north), New Cross (15 miles north-west), Thornton Heath (13 miles north-west), Croydon (11 miles north-west), East Dulwich (15 miles north-west) and Plumstead (15 miles north).
Landmarks near Brasted
Around Brasted, we work in homes near The White Hart pub, Church of St Martin and Combe Bank School, among other places. The nearest railway station is Dunton Green station, about 3.1 miles north-east of the centre. A little further out are Sevenoaks Museum (3.8 miles east) and Tandridge Priory (3.8 miles south-west). For a walk, there is Betsom's Hill and Dryhill Nature Reserve.
FAQs for Brasted
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Do you come to Brasted?
Yes. We cover the whole UK and travel to Brasted and the rest of Greater London. Send photos and we will quote, or call 0345 017 0787.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How much does bath repair cost in Brasted?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Towns and villages near Brasted
What else we do in Brasted
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Prices and what affects them
Prices start from £95. You will not pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Whether we combine several jobs
- Any earlier repairs that need removing first
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what helps:
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Signs you need bath repair in Brasted
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Customers typically contact us about:
- A chipped rim or side
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Holes from dropped items
What to look for in a quote
- Who will actually do the work
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
- What preparation is included
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Getting ready for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Advice
What we cannot put right
A repair is not right for every job, including:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
