Bath and North East Somerset · England
Bath chip & crack repair in Breach, Bath and North East Somerset
Bath repair in Breach without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- A chip where the taps sit
- Holes from dropped items
Common problems we fix in Breach
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- Damage beneath the taps
- A chipped rim or side
- Rust spots around the plughole
- Cracks in an acrylic bath
Questions to ask before you book
- Who turns up on the day
- How the colour is matched
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
About our bath repair in Breach
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Typical jobs include deep scratches in acrylic and rust spots around the plughole, in cast iron enamel, roll-top & freestanding and pressed steel enamel.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Breach (BS39)
- Area hub
- Bath and North East Somerset
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Breach
Also in Breach
Repairing versus replacing in Breach
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Rooms protected and left tidy
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Typically one visit, start to finish
See our pricing and bath cost comparison.
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Get a quote
Upload a photo of the damage and one of the whole item, and tell us you are in Breach, and we’ll reply with a fixed price.
Related advice
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Landlord and trade work in Breach
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Bath and North East Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About Breach
Breach is about 5 miles north-west of Midsomer Norton, in Bath and North East Somerset. Across the BS39 area, we carry out the work at your property. Breach is one of 136 places in Bath and North East Somerset we cover.
We work across the BS39 postcode area and the streets around it. We also travel to Clutton (1 mile south), Clutton Hill (1 mile east), Stanton Wick (1 mile north-west), Chelwood (1 mile north-east) and Temple Cloud (1 mile south). Further out, we also cover Bath (8 miles east), Keynsham (5 miles north), Bathwick (9 miles east), Walcot (9 miles north-east), Westmoreland (7 miles east) and Kingsmead (8 miles north-east).
Landmarks near Breach
Typical jobs here are in homes near Church of St Augustine and Clutton Primary School, among other places. Other landmarks nearby include Oval enclosure (1.7 miles west) and Paulton Memorial Hospital (3.5 miles south-east). For a walk, there is Knowle Hill and Hunstrete Lake.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Breach: your questions answered
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath does not move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
