Bath and North East Somerset · England
Bath chip & crack repair in Clutton, Bath and North East Somerset
Bath repair for Clutton, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
Bath repair in Clutton without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are damage beneath the taps and rusty patches near the plughole.
Whatever the size of the job, it’s backed by a one-year guarantee in Clutton and across Bath and North East Somerset.
- Where
- Clutton (BS39)
- County
- Bath and North East Somerset
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
In fairness, there are a few things a repair will not fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Check that an acrylic bath doesn’t move when you stand in it
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- A dripping tap stains enamel, so fix it early
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Towns and villages near Clutton
Other services in Clutton
Prices and what affects them
Prices start from £95. We price every job individually. What matters most is:
- How easy the damage is to reach
- What the surface is made of
- What kind of damage it is
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- One sharp close-up of the damage
- Details of any past repairs
- The material, if you know it
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
FAQs for Clutton
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Which areas do you work in?
The whole UK, including all of Bath and North East Somerset. Just include your postcode and we will confirm dates.
What happens after I send pictures?
You will get a fixed quote back, usually with dates to choose from. There is no obligation to book.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Where we work around Clutton
Clutton is about 4 miles north-west of Midsomer Norton, in Bath and North East Somerset. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Clutton is one of 136 towns and villages in Bath and North East Somerset where we work.
Our repair technicians cover all of BS39. Streets in the area include Station Road, Valley View and Venus Lane, and we cover them all. Other places close to Clutton include Temple Cloud (1 mile south), Breach (1 mile north), Clutton Hill (1 mile north-east), Cameley (1 mile south-west) and High Littleton (1 mile east). Further out, we also cover Bath (8 miles north-east), Keynsham (6 miles north), Bathwick (9 miles north-east), Walcot (9 miles north-east), Westmoreland (8 miles north-east) and Kingsmead (8 miles north-east).
Local landmarks in Clutton
Locally, our jobs take us to homes close to Clutton Primary School and Church of St Augustine, among other places. Nearby you’ll also find Paulton Memorial Hospital (3 miles south-east) and Oval enclosure (1.7 miles west). Green spaces nearby include Knowle Hill and Stephen's Vale Nature Reserve.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
What you get with us
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and resurfacing vs replacement cost guide.
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes a few hours in most cases. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
Before we arrive
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
