Bath and North East Somerset · England
Bath Repair for Stanton Wick homes
Local bath repair for Stanton Wick: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Stanton Wick and the surrounding area
Stanton Wick is about 4 miles south-west of Keynsham, in Bath and North East Somerset. Jobs in Stanton Wick are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Stanton Wick is one of 136 places in Bath and North East Somerset we cover.
Every address in BS39 is within our area. Streets in the area include Wick Lane and Stanton Wick Lane, all of which we cover. We also travel to Upper Stanton Drew (1 mile north-west), Stanton Drew (1 mile west), Pensford (1 mile north), Chelwood (1 mile east) and Breach (1 mile south-east). Larger places within reach include Bath (8 miles east), Keynsham (4 miles north-east), Bathwick (9 miles east), Walcot (9 miles east), Westmoreland (8 miles east) and Kingsmead (8 miles east).
Near you in Stanton Wick
In Stanton Wick, that means homes near Stanton Drew Primary School and St Thomas à Becket Church and the streets around them. The closest station to Stanton Wick is Keynsham station, about 5 miles north-east of the centre. Other landmarks nearby include South Bristol Community Hospital (4.2 miles north) and Oval enclosure (2 miles south-west). Not far away are Knowle Hill and Hunstrete Lake.
Bath repair in Stanton Wick without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the day after. Whether it’s cracks in an acrylic bath and rust spots around the plughole, we can normally put it right, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Stanton Wick (BS39)
- County
- Bath and North East Somerset
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
In fairness, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What bath repair costs
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- The material
- The colour and finish to match
- Doing more than one item at once
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A picture taken from further back
- A clear, close picture of the problem area
If you’re in Stanton Wick and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
So the finish stays in good condition:
- Do not leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Ask for a price
Upload pictures of the damage and a wider shot of the entire item, with your BS39 postcode, and we will come back with a fixed quote.
Advice
Places near Stanton Wick
Other services in Stanton Wick
What we’re called out for in Stanton Wick
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
Send us a picture if you notice any of these:
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
- Chips caused by builders
- Rust spots around the plughole
Before booking anyone
- When it can be used again
- What happens if they find more damage
- How the colour is matched
- Whether a trained technician does the job
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Stanton Wick questions
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
What areas do you cover?
The entire UK, including all of Bath and North East Somerset. Just include your postcode and we’ll offer you dates.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
How long before I can use the bath?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
About our accreditations · Every repair comes with a one-year guarantee.
