North Yorkshire · England
Bath Repair for Breighton homes
Problem with your bath in Breighton? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- A hole punched through by something heavy
How we handle bath repair in Breighton
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because the bath does not move. If you’re dealing with impact holes in acrylic and deep scratches in acrylic, we can usually put it right, on whirlpool & spa baths, acrylic and roll-top & freestanding alike.
We stand behind the work with a one-year guarantee.
- Where
- Breighton (YO8)
- County
- North Yorkshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Covering Breighton
Breighton is about 6 miles east of Selby, in North Yorkshire. Clients in Breighton get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in all 626 towns and villages in North Yorkshire, from the larger towns to small villages. We work right across the region, from Breighton to Leeds (25 miles away).
Jobs in YO8 work the same way as everywhere else we cover. Other places close to Breighton include Wressle (2 miles south), Woodhall (2 miles south-west), South Duffield (2 miles west), Newsholme (3 miles south) and Cliffe Common (3 miles west). Further out, we also cover Selby (6 miles west), Tadcaster (15 miles north-west), Barlby (5 miles west), Brayton (7 miles west), Thorpe Willoughby (8 miles west) and Hambleton (10 miles west).
What’s near Breighton
The closest station to Breighton is Wressle station, roughly 1.7 miles south of the centre. Well-known places in the area include Goole and District Hospital (5.9 miles south) and Menthorpe cum Bowthorpe (1 mile west). For a walk, there’s Skipwith Common.
What a repair can’t fix
In fairness, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- Nothing taken out or refitted
- Typically one visit, start to finish
- Same prices wherever you are
- We leave the room as we found it
See our full price list and guide to resurfacing and replacement costs.
Breighton: your questions answered
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across North Yorkshire.
When can I have a bath again?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What bath repair costs
Prices start from £95. We price every job individually. The main factors are:
- The material and finish
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The size and number of damaged areas
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Phone pictures are fine. Make sure they show:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- A picture taken from further back
- Any earlier repairs or coatings
Send us pictures of the damage and a wider shot of the entire item, with your YO8 postcode, and we will reply with a fixed quote.
Also near Breighton
More services for Breighton
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
