Devon · England
Bath Repair for Brimley homes
Bath repair for Brimley, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Holes from dropped items
- Rust spots around the plughole
How we handle bath repair in Brimley
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on acrylic, whirlpool & spa baths and pressed steel enamel, and common reasons people get in touch are scratches you can feel with a fingernail and a cracked acrylic bath.
Whatever the size of the job, it’s backed by a one-year guarantee in Brimley and across Devon.
- Location
- Brimley (TQ13)
- County
- Devon
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Your questions about bath repair in Brimley
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens next?
We come back with a fixed price, plus dates. There is no obligation to book.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Prices and what affects them
Prices start from £95. Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Access to the area
- The size and number of damaged areas
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A clear, close picture of the problem area
- Natural light rather than flash
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Do you need bath repair in Brimley?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Customers normally contact us about:
- Rust by the waste and overflow
- Holes from dropped items
- A kit repair that didn’t last
- A cracked acrylic bath
What your quote should include
- How long it needs to cure
- If travel is included in the price
- The length of the guarantee and what it covers
- What happens if they find more damage
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Where we work around Brimley
Brimley is about 5 miles north-west of Kingsteignton, in Devon. We visit clients in Brimley, so nothing has to leave your home. Brimley is one of 586 towns and villages in Devon where we work.
Our visits in TQ13 work the same way as everywhere else we cover. We also cover the places around Brimley: Bovey Tracey (1 mile north-east), Liverton (1 mile south), Coldeast (2 miles south-east), Heathfield (2 miles south-east) and Chudleigh Knighton (3 miles east). Larger places within reach include Exeter (12 miles north-east), Exmouth (13 miles east), Newton Abbot (5 miles south-east), Teignmouth (9 miles east), Kingsteignton (5 miles south-east) and Dawlish (10 miles east).
Near you in Brimley
We visit homes around Church of St John the Evangelist and Ilsington Church of England Primary School, among other places. Other landmarks nearby include Bovey Tracey Hospital (1.4 miles north-east) and House of Marbles (0.8 miles east). Open spaces near Brimley include Chudleigh Knighton Heath and Haytor Rocks.
Nearby places to Brimley
What else we do in Brimley
Repairing versus replacing in Brimley
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Brimley clients choose us
- Everything repaired in place
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Honest advice, even when it means no job
Take a look at our full price list and resurfacing vs replacement cost guide.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
