Devon · England
Bath chip & crack repair in Liverton, Devon
Fixed-price bath repair in Liverton and the surrounding area, normally in one visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Damage beneath the taps
Bath repair at your home in Liverton
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. If you’re dealing with scratches you can feel with a fingernail and chips on the rim or sides, we can generally put it right, on whirlpool & spa baths, pressed steel enamel and acrylic alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Liverton (TQ12)
- Area hub
- Devon
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Honest advice, even when it means no job
Take a look at our pricing or bath cost comparison.
Honest limits
We won’t take on work that won’t last, so these are the limits:
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow two to three hours for most chips from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the day after, the bath is ready to use.
Preparing for the visit
- Point us to the nearest place to park
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
How to get a price
If you’re in Liverton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Keep metal cans and razors off the surface
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Nearby places to Liverton
Other services in Liverton
Do you need bath repair in Liverton?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Impact holes in acrylic
- A cracked acrylic bath
- A chipped rim or side
- A chip where the taps sit
Questions to ask before booking
- Whether there are any call-out or travel charges
- How your room will be protected
- Whether cleaning and preparation are in the price
- How changes to the job are handled
Common questions in Liverton
How long before I can use the bath?
Usually within a day, though it depends on what we’ve done.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Which areas do you work in?
The whole UK, including all of Devon. Send your postcode with your pictures and we’ll confirm dates.
What affects the price in Liverton
Prices start from £95. You’ll know the full cost before you book. We take into account:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Where the damage is and how we get to it
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Any details about the material
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Covering Liverton
Liverton is about 4 miles north-west of Newton Abbot, in Devon. Whether you are in the middle of Liverton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Liverton is one of 586 places in Devon where we work.
Every address in TQ12 is within our area. Jobs here include addresses on Ley Close and Potters Yard and the roads around them. Neighbouring places we cover include Coldeast (1 mile east), Brimley (1 mile north), Heathfield (1 mile east), Bovey Tracey (2 miles north) and Chudleigh Knighton (3 miles north-east). Further out, we also cover Exeter (13 miles north-east), Exmouth (13 miles east), Newton Abbot (4 miles south-east), Teignmouth (8 miles east), Kingsteignton (4 miles east) and Dawlish (10 miles east).
Landmarks near Liverton
We visit homes around The Star Inn and Blackpool Church of England Primary School. The nearest railway station is Newton Abbot station, roughly 4.5 miles south-east. Well-known places in the area include Bovey Tracey Hospital (2.3 miles north) and House of Marbles (1.3 miles north). Open spaces near Liverton include Haytor Rocks and Chudleigh Knighton Heath.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
