Norfolk · England
Bath chip & crack repair in Briningham, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Briningham and across Norfolk. Send photos for a free, fixed quote.
- Repairs from £95
- A cracked acrylic bath
- A chip where the taps sit
Briningham questions
What does bath repair cost?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one.
Do you cover Briningham?
We do. We send a technician to Briningham for every job, and the price is the same as everywhere else.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
How we handle bath repair in Briningham
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Whether it’s impact holes in acrylic and rust spots around the plughole, we can typically put it right, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding alike.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Location
- Briningham (NR24)
- Region
- Norfolk
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
Send us photos and we’ll tell you honestly.
Materials we work on in Briningham
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Briningham customers choose us
- No need to remove anything
- Colour mixed on the day to match
- Honest advice, even when it means no job
- Free fixed quotes from pictures
Take a look at our pricing and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
What happens on the day
We work cleanly and quietly. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Keep a parking space free if you can
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
When to call us in Briningham
A cracked acrylic bath typically wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
If you can see any of these, send us a picture:
- A hole punched through by something heavy
- A chip where the taps sit
- Chips on the rim or sides
- Snagging damage from a refit
Before booking anyone
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
- How your room will be protected
- What aftercare is recommended
Our work in Briningham
Briningham is about 14 miles north of Dereham, in Norfolk. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover 797 places in Norfolk.
Here we cover the NR24 postcode area. We regularly work on streets such as The Street, Dereham Road and Holt Road. We also cover the places around Briningham: Brinton (1 mile north), Melton Constable (1 mile south-east), Stody (2 miles east), Thornage (2 miles north-east) and Sharrington (2 miles north). Within a short drive, we also cover Dereham (14 miles south), North Walsham (15 miles east), Sheringham (9 miles north-east), Taverham (15 miles south-east), Cromer (12 miles east) and Fakenham (8 miles west).
What’s near Briningham
Typical jobs here are in homes near Church of St Maurice, among other places. Further afield, we also cover the area around Thursford Collection (3.6 miles west) and Hunworth Castle Hill (2.2 miles east). For a walk, there’s Thursford Wood.
Landlord and trade work in Briningham
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Towns and villages near Briningham
What else we do in Briningham
How to look after the repair
To keep it looking its best for years:
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
- Keep metal cans and razors off the surface
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
