Norfolk · England
Bath Repair for Brinton homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Brinton, with a one-year guarantee on every repair.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rust spots around the plughole
What we are called out for in Brinton
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Keep an eye out for these signs:
- Cracks in an acrylic bath
- Deep scratches in acrylic
- Chips under the taps
- Rust by the waste and overflow
What to look for in a quote
- What aftercare is recommended
- Who turns up on the day
- How long it needs to cure
- A fixed quote, and whether VAT is included
Bath repair at your home in Brinton
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. If you’re dealing with chips under the taps and rusty patches near the plughole, we can generally put it right.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Where
- Brinton (NR24)
- County
- Norfolk
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Brinton questions
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will I be able to see the repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What we can’t put right
In fairness, some problems need a different fix:
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Brinton
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How the visit works
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a morning or an afternoon from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Landlords, agents and businesses in Brinton
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
How we price bath repair
Repairs from £95. You will know the full cost before booking. We take into account:
- The material
- Doing more than one item at once
- Access to the area
- How many areas need work
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- Something in shot to show the size
- What it’s made of, if you know
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Brinton and nearby
Brinton is about 15 miles north of Dereham, in Norfolk. Whether you are in the middle of Brinton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Brinton is one of 797 places in Norfolk where we work.
Postcode districts we cover here: NR24. That includes homes on The Street and Stody Road. Neighbouring places we cover include Sharrington (1 mile north), Thornage (1 mile north-east), Briningham (1 mile south), Stody (1 mile east) and Hunworth (2 miles east). We also work in nearby towns such as Dereham (15 miles south), North Walsham (15 miles east), Sheringham (9 miles north-east), Taverham (15 miles south-east), Cromer (12 miles east) and Fakenham (8 miles south-west).
Landmarks near Brinton
We visit homes around Church of St Andrew and the streets around them. A little further out are Hunworth Castle Hill (2.1 miles east) and The Shell Museum (3.5 miles north). Open spaces near Brinton include Thursford Wood.
Nearby places to Brinton
Also in Brinton
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Make sure an acrylic bath is firm underfoot
- Cover the bath during DIY or decorating
- Rinse the bath after use, especially in hard water areas
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
