Norfolk · England
Bath chip & crack repair in Briston, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths in Briston, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Damage beneath the taps
Bath repair in Briston without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include deep scratches in acrylic and snagging damage from a refit, in acrylic, cast iron enamel and pressed steel enamel.
Every job is backed for twelve months in Briston and everywhere else. If something goes wrong with the work, we come back.
- Location
- Briston (NR24)
- County
- Norfolk
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Briston?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Everything repaired in place
- Fixed prices from your photos
- Generally one visit, start to finish
- Rooms protected and left tidy
Take a look at our pricing or bath cost comparison.
When to call us in Briston
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Send us a picture if you notice any of these:
- Holes from dropped items
- Cracks in an acrylic bath
- Rust by the waste and overflow
- A chipped rim or side
Questions to ask before booking
- How changes to the job are handled
- What aftercare is recommended
- Whether the colour is mixed to match
- Whether the price covers travel
Also near Briston
Also in Briston
Our work in Briston
Briston is about 13 miles north-east of Dereham, in Norfolk. We visit customers in Briston and nearby villages, so nothing has to leave your home. We cover all 797 towns and villages in Norfolk.
Here we cover the NR24 postcode area. From Church Lane, Church Street and Hewitts Close or anywhere nearby, we can come to you. Neighbouring places we cover include Melton Constable (1 mile west), Stody (2 miles north), Hunworth (2 miles north), Briningham (2 miles north-west) and Nethergate (2 miles south). We also work in nearby towns such as Dereham (13 miles south-west), North Walsham (14 miles east), Sheringham (9 miles north-east), Taverham (13 miles south-east), Cromer (11 miles north-east) and Fakenham (9 miles west).
Landmarks near Briston
In Briston, that means homes near Church of All Saints and Astley Primary School, among other places. Other landmarks nearby include Hunworth Castle Hill (1.7 miles north-east).
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- How much damage there is
- Unusual colours or finishes
- How many items we do on one visit
- Previous DIY repairs that have to come out
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Two or three clear pictures are usually enough. Try to include:
- The material, if you know it
- One picture of the entire bath
- A close-up of the damage, in focus
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
How to look after the repair
Once the work has cured, treat it gently:
- Rinse the bath after use, especially in hard water areas
- Don’t scrub with anything abrasive
- Use a soft cloth and washing-up liquid for everyday cleaning
- Have new chips seen to early
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow a few hours, depending on the damage.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
- Let us know about parking or access
Getting a price
Upload photos of the damage and a wider shot of the whole item, and tell us you are in Briston, and we’ll come back with a fixed quote.
Related advice
Questions from Briston
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
