Cumbria · England

Bath Repair for Broadwath homes

Bath repair across Broadwath and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Rust by the waste and overflow
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Broadwath homes

What a repair can’t fix

We would rather lose a job than do one that won’t last, so these are the limits:

  • Metal that has corroded all the way through
  • Leaking fittings, which need a plumber
  • Wear across the entire surface, which needs re-enamelling

Send us photos and we will tell you honestly.

Surfaces we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

Bath repair in Broadwath without replacing anything

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a hole punched through by something heavy and damage beneath the taps, in cast iron enamel, whirlpool & spa baths and pressed steel enamel.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Before and after: a chipped, rust-stained bath around the plughole
Area
Broadwath (CA8)
Region
Cumbria
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Common problems we fix in Broadwath

A cracked acrylic bath usually wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until it cracks.

The most common problems we are called about are:

  • Scratches you can feel with a fingernail
  • Impact holes in acrylic
  • Snagging damage from a refit
  • Rust spots around the plughole

What your quote should include

  • What prep work is covered
  • The length of the guarantee and what it covers
  • What aftercare is recommended
  • How the colour is matched

How to compare quotes

Repairing versus replacing in Broadwath

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Broadwath

  • Dust sheets down, tidy finish
  • Every repair guaranteed for a year
  • CHAS and Constructionline accredited
  • Work done at your home or business

Take a look at our pricing and bath cost comparison.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • Protect the bath with a towel when doing jobs nearby
  • Keep abrasive pads and gritty cleaners away from the bath
  • Fix dripping taps early to stop staining and limescale
  • Do not leave a fresh chip for long

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Broadwath and nearby

Broadwath is about 5 miles east of Carlisle, in Cumbria. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Broadwath is one of 438 places in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 47 miles away.

Here we cover the CA8 postcode area. Other places close to Broadwath include Great Corby (1 mile south-west), Burnrigg (1 mile south-west), Wetheral (1 mile south-west), Wetheral Pasture (2 miles south-west) and Cumwhinton (3 miles south-west). Larger places within reach include Carlisle (5 miles west), Currock (5 miles west), Raffles (6 miles west), Botcherby (5 miles west), Morton (6 miles west) and Wigton (15 miles west).

Local landmarks in Broadwath

Our customers here include homes close to Church of St Paul and Great Corby Primary School, among other places. For rail, the closest station is Wetheral station, roughly 1.2 miles south-west. A little further out are Corby Castle (1.1 miles south-west) and Garlands Hospital (3.3 miles west). The countryside around Broadwath includes Talkin Tarn.

Map of Broadwath © OpenStreetMap contributors

FAQs for Broadwath

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Cumbria.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Will the repair last?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.

How much does bath repair cost in Broadwath?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Is a cracked acrylic bath repairable?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

How it works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep children and pets away from the room on the day
  • Mention if the room is upstairs or in a flat

How to get a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Read more

What affects the price in Broadwath

Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • What kind of damage it is
  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

The better the photos, the more accurate the price. Here’s what we find most useful:

  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • The material, if you know it
  • A wider photo showing the whole bath

The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Landlord and trade work in Broadwath

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.