Staffordshire · England
Bath Repair for Brocton homes
Bath repair for Brocton, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Rust by the waste and overflow
- Deep scratches in acrylic
Bath repair in Brocton, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s chips on the rim or sides and holes from dropped items, we can generally put it right, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Brocton (ST17)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Get a dripping tap fixed promptly
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Do not leave razors or cans standing in the bath
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Places near Brocton
More services for Brocton
What we’re called out for in Brocton
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
People normally call us when they notice one of these:
- Chips under the taps
- Rust spots around the plughole
- A cracked acrylic bath
- A chipped rim or side
Comparing quotes
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- When it can be used again
- What protection goes down before work starts
FAQs for Brocton
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair a crack in an acrylic bath?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Do you come to Brocton?
Yes. We work across the UK and come to Brocton and the rest of Staffordshire. Send photos and we will quote, or call 0345 017 0787.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Repair or replace in Brocton?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Same prices wherever you are
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Read our prices page and resurfacing vs replacement cost guide.
Our work in Brocton
Brocton is about 4 miles south-east of Stafford, in Staffordshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Brocton is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 22 miles away.
Postcode districts we cover here: ST17. Streets in the area include The Green, Park Lane and Bracken View, all of which we cover. We also cover the places around Brocton: Bednall Head (1 mile south), Walton-on-the-Hill (1 mile north-west), Milford (1 mile north), Bednall (1 mile south-west) and Berkswich (1 mile north-west). We also work in nearby towns such as Stafford (4 miles north-west), Cannock (5 miles south), Lichfield (11 miles south-east), Longton (15 miles north), Rugeley (5 miles east) and Burntwood (8 miles south-east).
Local landmarks in Brocton
Around Brocton, we work in homes near Berkswich CofE (VC) Primary School, All Saints Church and Walton High School. Brocton’s nearest station is Stafford station, about 3.8 miles north-west of the centre. Other landmarks nearby include The Staffordshire Police Museum (1.8 miles north-west) and Stafford Hospital (3.4 miles north-west). For a walk, there’s Radford Meadows and Tixall Wide.
The process
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Ask for a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Brocton, and we will come back with a fixed quote.
Related advice
What we cannot put right
Some jobs aren’t right for a repair, including:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
Send us pictures and we will tell you honestly.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
We work for landlords, letting agents and housing providers in Brocton as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
