Staffordshire · England
Bath chip & crack repair in Milford, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Milford and across Staffordshire. Send photos for a free, fixed quote.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips on the rim or sides
Keeping it looking good
Aftercare is simple:
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our bath repair in Milford
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you are dealing with a hole punched through by something heavy and hairline or through cracks in acrylic, we can typically put it right.
Big or small, you get the same one-year guarantee.
- Where
- Milford (ST17)
- Area hub
- Staffordshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Milford
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Look out for any of the following:
- Cracks in an acrylic bath
- Holes from dropped items
- A kit repair that didn’t last
- Scuffs and scratches in the surface
What to look for in a quote
- Whether a trained technician does the job
- What aftercare is recommended
- How changes to the job are handled
- How soon you can use it again
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and we start. Allow a few hours.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Getting a price
Most clients in Milford get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Honest limits
In fairness, there are a few things a repair will not fix:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Milford
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Milford customers choose us
- Same prices wherever you are
- Work done at your home or business
- Straight answers about what a repair can do
- Every repair guaranteed for a year
Read our pricing or guide to resurfacing and replacement costs.
Milford and the surrounding area
Milford is about 3 miles east of Stafford, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Milford is one of 512 places in Staffordshire where we work. Our nearest city page is Birmingham, about 23 miles away.
We cover every part of ST17. Whether you live on Holdiford Road, Brocton Road and Main Road or anywhere nearby, a technician can come to you. Nearby, we also work in Tixall (1 mile north), Walton-on-the-Hill (1 mile west), Brocton (1 mile south), Berkswich (1 mile west) and Baswich (2 miles west). Larger places within reach include Stafford (3 miles west), Cannock (6 miles south), Lichfield (12 miles south-east), Longton (14 miles north), Rugeley (5 miles south-east) and Burntwood (9 miles south-east).
Landmarks near Milford
Around Milford, we work in homes near Walton High School, Berkswich CofE (VC) Primary School and Shugborough Park, among other places. The nearest railway station is Stafford station, about 3.5 miles west of the centre. Well-known places in the area include Stafford Castle (4.5 miles west) and The Staffordshire Police Museum (1.7 miles west). For a walk, there is Tixall Wide and Radford Meadows.
Your questions about bath repair in Milford
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What areas do you cover?
All of Staffordshire, and the rest of the UK. There’s no extra charge for travel.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
How long before I can use the bath?
Usually within a day, depending on the repair.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Nearby places to Milford
Also in Milford
What affects the price in Milford
Prices start from £95. We do not charge extra for travel to Milford. The price comes down to:
- What kind of damage it is
- Doing more than one item at once
- Where the damage is and how we get to it
- How hard the colour is to match
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
You can take the photos on your phone. Just make sure we can see:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Where you are, by postcode
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
