Wirral · England
Bath Repair for Bromborough homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Bromborough. Send photos for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Snagging damage from a refit
Bath repair in Bromborough without replacing anything
A typical bath repair is a few hours’ work, and you can generally bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. We regularly repair roll-top & freestanding, cast iron enamel and acrylic, and people most often call us about chips on the rim or sides and rust spots around the plughole.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bromborough (CH62, CH63)
- Region
- Wirral
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Arrival times are agreed in advance. Once we are there, the work takes two to three hours for most chips. The room is left tidy and you’ll know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Let the surface dry out before the visit
Getting a price
For a price in Bromborough, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Towns and villages near Bromborough
Also in Bromborough
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Bromborough, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Do you need bath repair in Bromborough?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
People normally call us when they notice something like this:
- A failed DIY repair that is discoloured or lifting
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
Before booking anyone
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What affects the price in Bromborough
Repairs from £95. There’s no area surcharge for Bromborough. The price reflects:
- How many areas need work
- How many items we do on one visit
- What kind of damage it is
- The material and finish
Our prices are the same across the UK, with no extra for Bromborough. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
You can typically get a fixed price without us visiting. To help us price it:
- Details of any past repairs
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- The material, if you know it
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
When we would advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Repair or replace in Bromborough?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- We come to you, anywhere in the UK
- One visit for most repairs
- Same prices wherever you are
- Honest advice, even when it means no job
Read our full price list or bath cost comparison.
Bromborough questions
Do you work in Bromborough?
Yes, we do. Technicians travel to Bromborough from across the region, with no extra charge for travel.
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can rust on a bath be repaired?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a hole in a bath?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
Will there be a smell?
There may be a mild smell during the work.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Covering Bromborough
Bromborough is about 1 mile south-east of Bebington, in Wirral. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 44 towns and villages across Wirral, from the larger towns to small villages.
Postcode districts we cover here: CH62 and CH63. From Acre Lane, Mill Road and The Avenue or a nearby road, we can come to you. You’ll find Bromborough on the A41, so it’s easy for us to reach. Close by, we cover Bebington (1 mile north-west), Eastham Ferry (1 mile south-east), Bromborough Pool (1 mile north), Raby Mere (1 mile south-west) and Port Sunlight (1 mile north-west). Further out, we also cover Birkenhead (4 miles north-west), Wallasey (6 miles north-west), Heswall (5 miles west), Moreton (7 miles north-west), West Kirby (8 miles west) and Greasby (7 miles north-west). As one of the bigger places in Wirral, Bromborough sees plenty of our work.
Near you in Bromborough
Around Bromborough, we work in homes near St Barnabas' Church, Marfords Park and Wirral Grammar School for Boys. Also close by are Co-op Academy Woodslee (less than half a mile west) and The Bromborough pub (less than half a mile south). The nearest railway station is Bromborough Rake station, about 0.6 miles south-west. A little further out are Liverpool Castle (4.8 miles north) and Municipal Borough of Bebington (1.4 miles north-west). Green spaces nearby include Princes Park lake and New Ferry Butterfly Park.
About our accreditations · Every repair comes with a one-year guarantee.
