Wirral · England
Bath chip & crack repair in Moreton, Wirral
Bath repair for Moreton, without a refit. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
About our bath repair in Moreton
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Common call-outs are for hairline or through cracks in acrylic and chips caused by builders, in cast iron enamel, acrylic and roll-top & freestanding.
Every repair comes with our one-year guarantee, wherever you are in Wirral.
- Location
- Moreton (CH46, CH49, CH43)
- Region
- Wirral
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Moreton
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Where we work around Moreton
Moreton is about 3 miles south-west of Wallasey, in Wirral. Clients in Moreton get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Our technicians cover 44 places in Wirral. We work right across the region, from Moreton to Liverpool (8 miles away).
Our visits in CH46, CH49 and CH43 work the same way as everywhere else we cover. From Ivy Lane, Carr Lane and Digg Lane or anywhere nearby, we can come to you. You will find Moreton on the M53 and A553, which makes it straightforward to reach. We also travel to Overchurch (1 mile south), Saughall Massie (1 mile south-west), Leasowe (1 mile north-east), Beechwood (1 mile east) and Upton (1 mile south-east). Further out, we also cover Birkenhead (3 miles south-east), Wallasey (3 miles north-east), Bebington (6 miles south-east), Heswall (5 miles south), West Kirby (3 miles south-west) and Bromborough (7 miles south-east). Moreton is one of the larger places we cover in Wirral.
Landmarks near Moreton
Typical jobs here are in homes near Meols Park, Upton Hall School FCJ and The Plough Inn, among other places. Other local landmarks include Moreton Christ Church CofE Primary School (less than half a mile south) and Christ Church (within half a mile south). There’s a railway station in Moreton itself: Moreton (Merseyside) station. Nearby you’ll also find Wirral Women and Children's Hospital (2.2 miles south) and Hoylake Lifeboat Museum (3 miles west). The countryside around Moreton includes Bidston Hill and West Kirby Marine Lake.
What bath repair costs
Repairs from £95. There is no area surcharge for Moreton. The price reflects:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The colour and finish to match
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Also near Moreton
Also in Moreton
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Repair or replace in Moreton?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Moreton clients choose us
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- One price list for the entire UK
- Most jobs done in one visit
Take a look at our full price list and bath cost comparison.
Common problems we fix in Moreton
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Most people get in touch when they notice something like this:
- Chips caused by builders
- A kit repair that didn’t last
- Holes from dropped items
- Rusty patches near the plughole
What your quote should include
- Whether the colour is mixed to match
- What aftercare is recommended
- The length of the guarantee and what it covers
- How your room will be protected
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. Allow a few hours, depending on the damage, and we’ll tell you if anything changes.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Clear the area around the damage
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
