Wirral · England
Bath Repair in Greasby
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Greasby and across Wirral. Free, fixed quotes from your photos.
- Repairs from £95
- Hairline or through cracks in acrylic
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Greasby
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We are often asked to fix scuffs and scratches in the surface and damage beneath the taps, across roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
A one-year guarantee comes as standard.
- Area
- Greasby (CH49)
- Area hub
- Wirral
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why Greasby clients choose us
- A year’s guarantee on all work
- One visit for most repairs
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
Read our prices page and bath cost comparison.
Also near Greasby
Other services in Greasby
Questions from Greasby
What areas do you cover?
We work UK-wide, and that includes Greasby. Our prices are the same everywhere.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Greasby.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Greasby and the surrounding area
Greasby is about 3 miles west of Birkenhead, in Wirral. From the centre of Greasby to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Greasby is one of 44 towns and villages in Wirral we cover. Our jobs stretch from Greasby to Liverpool (about 8 miles away).
We cover every part of CH49. Jobs here include addresses on Beauworth Avenue, Witney Close and Redford Close. Other places close to Greasby include Frankby (1 mile south-west), Saughall Massie (1 mile north), Irby Hill (1 mile south), Overchurch (1 mile north-east) and Larton (1 mile west). Within a short drive, we also cover Birkenhead (3 miles east), Wallasey (4 miles north-east), Bebington (6 miles south-east), Heswall (3 miles south), Bromborough (7 miles south-east) and Lower Bebington (5 miles east). Greasby is one of the larger places we cover in Wirral.
Near you in Greasby
Typical jobs here are in homes near Royden Park, Greasby Infant School and Red Cat pub, among other places. You will also find Upton Hall School FCJ (1 mile north-east) and St Nicholas (under half a mile south-east). Greasby’s nearest station is Upton station, roughly 1.7 miles east. Well-known places in the area include West Kirby Museum (2.3 miles west) and Arrowe Park Hospital (1.2 miles south-east). For a walk, there’s Bidston Hill and West Kirby Marine Lake.
Landlords, agents and businesses in Greasby
We work for landlords, letting agents and housing providers in Greasby as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Common problems we fix in Greasby
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- An old repair that has yellowed or come loose
- Chips under the taps
- Deep scratches in acrylic
- A hole punched through by something heavy
Before you book anyone
- How long it needs to cure
- How your room will be protected
- How changes to the job are handled
- Whether the price is fixed and includes VAT
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
How to care for the repair
After the repair has cured, a few habits help it last:
- Put a towel in the bath if you’re working above it
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
- Make sure an acrylic bath is firm underfoot
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
The process
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, depending on the damage, including clearing up.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Open a window if you can
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
When a repair is not the answer
We would rather lose a job than do one that won’t last, so these are the limits:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Greasby
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
