Wiltshire · England
Bath chip & crack repair in Bromham, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bromham, with a one-year guarantee on every repair.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Bromham and nearby
Bromham is about 4 miles east of Melksham, in Wiltshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in 425 places in Wiltshire. Our nearest city page is Birmingham, about 75 miles away.
Here we cover the SN15 postcode area. Local streets include High Street, Breach Close and School Lane, all of which we cover. If you’re just outside Bromham, we cover Westbrook (1 mile west), Chittoe Heath (1 mile north), Chittoe (1 mile north-west), Rowde (2 miles south-east) and Tanis (2 miles south-east). Larger places within reach include Trowbridge (8 miles south-west), Chippenham (6 miles north-west), Calne (4 miles north-east), Devizes (4 miles south-east), Westbury (11 miles south-west) and Melksham (4 miles west).
Landmarks near Bromham
Typical jobs here are in homes near St Nicholas Church of England VC Primary School and Church of St Nicholas. The nearest railway station is Melksham station, about 4.1 miles west. Further afield, we also cover the area around Spye Park Stables Museum (1.4 miles north-west) and Shane's Castle (3 miles south-east). The countryside around Bromham includes King's Play Hill.
Bath repair in Bromham without replacing anything
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with rust spots around the plughole and deep scratches in acrylic, we can generally put it right, whatever the material.
All our work comes with our one-year guarantee, wherever you are in Wiltshire.
- Where
- Bromham (SN15)
- Area hub
- Wiltshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
After the repair has cured, a few habits help it last:
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we’re called out for in Bromham
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- Rusty patches near the plughole
- Impact holes in acrylic
- A cracked acrylic bath
- Chips under the taps
Questions to ask before booking
- What preparation is included
- How your room will be protected
- Whether a trained technician does the job
- The length of the guarantee and what it covers
Towns and villages near Bromham
Other services in Bromham
Your questions about bath repair in Bromham
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you come to Bromham?
Yes. We work across the UK and come to Bromham and the rest of Wiltshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
Prices and what affects them
Prices start from £95. We price every job individually, from your pictures. The main factors are:
- Access to the area
- Unusual colours or finishes
- Doing more than one item at once
- How many areas need work
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
How to get a fixed price
You can typically get a fixed price without us visiting. To help us price it:
- Natural light rather than flash
- Something in shot to show the size
- One picture of the whole bath
- A close-up of the damage, in focus
Email us photos of the damage and a wider shot of the whole item, and tell us you are in Bromham, and we’ll come back with a fixed quote.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
Repair or replace in Bromham?
People frequently assume a cracked or chipped bath has to come out. Generally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Free fixed quotes from pictures
- One-year guarantee on every repair
See our pricing or resurfacing vs replacement cost guide.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
