Norfolk · England
Bath Repair for Brooke homes
Bath repair in and around Brooke: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- Rust by the waste and overflow
How it works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
How we handle bath repair in Brooke
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are often asked to fix hairline or through cracks in acrylic and a hole punched through by something heavy, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Brooke (NR15)
- County
- Norfolk
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Brooke
Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Where the damage is and how we get to it
- Whether we combine several jobs
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the pictures on your phone. Make sure they show:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair will not do:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Send us photos and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Do you need bath repair in Brooke?
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.
Look out for any of the following:
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
Comparing quotes
- How changes to the job are handled
- What preparation is included
- Whether the colour is mixed to match
- Whether a trained technician does the job
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Where we work around Brooke
Brooke is about 7 miles south-east of Norwich, in Norfolk. From the centre of Brooke to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 797 places in Norfolk.
Our visits in NR15 are booked in the same way as anywhere else. Whether you live on The Street, Norwich Road and Windermere Close or a nearby road, a technician can come to you. We also cover the places around Brooke: Howe (1 mile north-west), Kirstead Green (1 mile south), Bergh Apton (2 miles north-east), Alpington (2 miles north) and Yelverton (2 miles north). Larger places within reach include Norwich (7 miles north-west), Wymondham (11 miles west), Gorleston-on-Sea (15 miles east), Sprowston (8 miles north), Thorpe St Andrew (7 miles north) and Attleborough (15 miles west).
Local landmarks in Brooke
We visit homes around St Peter's Church, Kings Head Public House and Brooke Voluntary Controlled Church of England Primary School and the streets around them. Nearby you’ll also find Claxton Castle (4.2 miles north-east) and St Andrew's Hospital (5.9 miles north). For a walk, there’s RSPB Surlingham Church Marsh.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
- Cover the bath during DIY or decorating
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Also near Brooke
Also in Brooke
Landlord and trade work in Brooke
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
FAQs for Brooke
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Brooke.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
What happens next?
We review the pictures and send a fixed quote with dates.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
