Norfolk · England
Bath chip & crack repair in Kirstead Green, Norfolk
Bath repair across Kirstead Green and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Cracks in an acrylic bath
About our bath repair in Kirstead Green
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. We’re often asked to fix chips caused by builders and impact holes in acrylic, on pressed steel enamel, roll-top & freestanding and cast iron enamel.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Kirstead Green (NR15)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- Colour mixed on the day to match
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
See our full price list or resurfacing vs replacement cost guide.
Nearby places to Kirstead Green
Other services in Kirstead Green
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What affects the price in Kirstead Green
Repairs from £95. We charge the same across the UK, including Kirstead Green. What changes the price is:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How hard the colour is to match
- What the surface is made of
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Covering Kirstead Green
Kirstead Green is about 9 miles south-east of Norwich, in Norfolk. We visit homes and businesses in Kirstead Green and nearby villages, so you do not need to take anything anywhere. Kirstead Green is one of 797 towns and villages in Norfolk where we work.
Here we cover the NR15 postcode area. Whether you live on Kirstead Green and Green Man Lane or anywhere nearby, a technician can come to you. We also travel to Brooke (1 mile north), Howe (2 miles north-west), Bergh Apton (3 miles north), Alpington (3 miles north) and Saxlingham Green (3 miles west). We also work in nearby towns such as Norwich (9 miles north-west), Wymondham (11 miles west), Gorleston-on-Sea (15 miles east), Sprowston (10 miles north), Thorpe St Andrew (8 miles north) and Southtown (15 miles east).
Local landmarks in Kirstead Green
Typical jobs here are in homes near Church of St Margaret. Further afield, we also cover the area around Claxton Castle (4.9 miles north-east).
Kirstead Green: your questions answered
How long before I can use the bath?
Normally by the following day, depending on the repair.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can a cracked acrylic bath be fixed?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
Send us photos and we will tell you honestly.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What happens on the day
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. You can expect it to take a few hours, depending on the damage, and we’ll keep you posted as we go.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.
Read more
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Kirstead Green, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Looking after it afterwards
Looking after the surface is easy:
- Check that an acrylic bath does not move when you stand in it
- Do not scrub with anything abrasive
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
