Cumbria · England
Bath Repair for Broughton Moor homes
Bath repair across Broughton Moor and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- Snagging damage from a refit
What we cannot put right
It helps to know what we cannot do:
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Broughton Moor
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Bath repair in Broughton Moor without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Whether it’s a chipped rim or side and rusty patches near the plughole, we can typically put it right, on roll-top & freestanding, pressed steel enamel and acrylic alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Broughton Moor (CA15)
- Area hub
- Cumbria
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Do you need bath repair in Broughton Moor?
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
These are the problems we’re asked about most:
- Rust by the waste and overflow
- Chips on the rim or sides
- Holes from dropped items
- A failed DIY repair that’s discoloured or lifting
Questions to ask before booking
- What happens if they find more damage
- Whether there are any call-out or travel charges
- What aftercare is recommended
- What protection goes down before work starts
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Work for landlords and builders
Landlords, letting agents and housing providers in Broughton Moor use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Our work in Broughton Moor
Broughton Moor is about 5 miles north-east of Workington, in Cumbria. Jobs in Broughton Moor are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover all 438 towns and villages in Cumbria, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 76 miles away.
Here we cover the CA15 postcode area. Jobs here include addresses on Church Road, The Avenue and School Close. We also travel to Little Broughton (2 miles south-east), Great Broughton (2 miles south-east), Broughton Cross (2 miles south-east), Dovenby (3 miles east) and Great Clifton (3 miles south). Further out, we also cover Workington (5 miles south-west), Whitehaven (11 miles south-west), Cockermouth (5 miles south-east), Keswick (15 miles south-east), Moorclose (5 miles south-west) and Wigton (15 miles north-east).
Around Broughton Moor
Around Broughton Moor, we work in homes near Netherhall School, Church of St Columba and Broughton Moor Primary School, among other places. Broughton Moor’s nearest station is Maryport station, roughly 1.9 miles north-west of the centre. Nearby you’ll also find Ellenborough and Ewanrigg (1.4 miles north-west) and Senhouse Roman Museum (2.4 miles north-west). For a walk, there is Siddick Pond.
Your questions about bath repair in Broughton Moor
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you come to Broughton Moor?
We do. We send a technician to Broughton Moor for every job, and the price is the same as everywhere else.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
When can I have a bath again?
Most baths can be used the next day. We confirm the time before we leave.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Also near Broughton Moor
More services for Broughton Moor
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Give the bath a quick rinse after use
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get a dripping tap fixed promptly
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- The type of damage
- How many items we do on one visit
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- The material, if you know it
For a price in Broughton Moor, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
Ask for a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Broughton Moor, and we’ll reply with a fixed price.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
