Greater Manchester · England
Bath chip & crack repair in Brunswick, Greater Manchester
Problem with your bath in Brunswick? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Chips along the edge of the bath
Bath repair in Brunswick, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Our repair technicians work on cast iron enamel, pressed steel enamel and acrylic, and the jobs we see most are chips caused by builders and rusty patches near the plughole.
You get a one-year guarantee, the same in Brunswick as everywhere else we work.
- Location
- Brunswick (M14, M13, M15)
- Area hub
- Greater Manchester
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Brunswick
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do you come to Brunswick?
Yes. We cover the whole UK and travel to Brunswick. Send us photos for a fixed quote, or call 0345 017 0787.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Are there extra charges for Brunswick?
We do not add a call-out fee. The fixed quote covers the visit and the work.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Open a window if you can
Getting a price
Upload a picture of the damage and one of the whole item, with your M14 postcode, and we’ll come back with a fixed quote.
Read more
Brunswick and nearby
Brunswick is about 1 mile south of Manchester, in Greater Manchester. Clients in Brunswick get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Brunswick is one of 72 places in Greater Manchester where we work.
Every address in M14, M13 and M15 is covered. From Maine Road, Oxney Road and Banff Road or a nearby road, we can come to you. If you are just outside Brunswick, we cover Rusholme (1 mile south-east), Greenheys (1 mile west), Victoria Park (1 mile east), Chorlton-on-Medlock (1 mile north-east) and All Saints (1 mile north-west). Within a short drive, we also cover Wythenshawe (5 miles south), Broughton (3 miles north-west), Openshaw (3 miles east), Butler Green (6 miles north-east), Heaton Norris (4 miles south-east) and Higher Broughton (3 miles north).
Near you in Brunswick
Locally, our jobs take us to homes close to Manchester School of Theatre, Holy Name Roman Catholic Primary School Manchester and University of Manchester Library, among other places. Nearby too are Christ Church (less than half a mile west), Manchester Academy (within half a mile west), The Ford Madox Brown pub (under half a mile south-east) and Whitworth Park (less than half a mile south). The closest station to Brunswick is Ardwick station, roughly 1 mile north-east. Well-known places in the area include Manchester Precinct Centre (0.6 miles north) and University Dental Hospital of Manchester (within half a mile north). Open spaces near Brunswick include Boating lake and Unicorn Grocery.
- Other local spots include All Saints' (0.7 miles north)
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse the bath after use, especially in hard water areas
- Do not leave a fresh chip for long
- Store metal items away from the bath
- Avoid scourers, wire wool and gritty cream cleaners
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Landlord and trade work in Brunswick
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Towns and villages near Brunswick
What else we do in Brunswick
What we can’t put right
Before you book, it’s worth knowing the limits too:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
What bath repair costs
Prices start from £95. We price every job individually. What matters most is:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- How many areas need work
- How many items we do on one visit
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- The material, if you know it
- Details of any past repairs
- A wider photo showing the whole bath
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Repair or replace in Brunswick?
Many people think a damaged bath means a new one. Normally it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
What you get with us
- No need to remove anything
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
See our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
