Bridgend · Wales

Bath Repair in Brynnau Gwynion

Bath repair in Brynnau Gwynion without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Brynnau Gwynion?

Bath repair in Brynnau Gwynion, done in place

Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you are dealing with scratches you can feel with a fingernail and snagging damage from a refit, we can help, on acrylic, whirlpool & spa baths and roll-top & freestanding alike.

All our work comes with a one-year guarantee, wherever you are in Bridgend.

Where
Brynnau Gwynion (CF35)
County
Bridgend
Guarantee
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Landlord and trade work in Brynnau Gwynion

If you manage property in Brynnau Gwynion, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.

Common questions in Brynnau Gwynion

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Can you repair a hole in a bath?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Brynnau Gwynion.

Is repairing better than replacing?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Will the repair last?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Repairing versus replacing in Brynnau Gwynion

Swapping a damaged bath for a new one typically means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. Our prices are the same across the UK, so there is no premium for Brynnau Gwynion. What changes the price is the job itself: the material, the amount of damage and how many items.

Why book with us

  • Colours mixed by hand to suit your surface
  • Usually one visit, start to finish
  • One price list for the entire UK
  • Straight answers about what a repair can do

See our prices page and guide to resurfacing and replacement costs.

Do you need bath repair in Brynnau Gwynion?

A cracked acrylic bath usually wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.

Common reasons people in Brynnau Gwynion contact us are:

  • Rust spots around the plughole
  • Chips under the taps
  • Chips caused by builders
  • Chips on the rim or sides

What your quote should include

  • What aftercare is recommended
  • Whether cleaning and preparation are in the price
  • Whether a trained technician does the job
  • How soon you can use it again

Our hiring checklist

What we can’t put right

A repair isn’t right for every job, for example:

  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet
  • Leaks from the waste or overflow fittings (a plumber’s job)

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel

What we do, step by step

We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep children and pets away from the room on the day
  • Keep a parking space free if you can

How to get a price

Email us pictures of the damage and one of the entire item, with your CF35 postcode, and we’ll come back with a fixed quote.

Get a free quote

Read more

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

How to look after the repair

So the finish stays in good condition for years:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Get a dripping tap fixed promptly
  • If an acrylic bath flexes, have its feet adjusted
  • Protect the bath with a towel when doing jobs nearby

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Brynnau Gwynion and nearby

Brynnau Gwynion is about 5 miles east of Bridgend, in Bridgend. Wherever you are in the CF35 postcode area, a technician comes to you. We cover 91 places in Bridgend, from the larger towns to small villages.

Our technicians cover all of CF35. Streets in the area include Red Roofs Close, Brynna Road and Manor Park, all of which we cover. Nearby, we also work in Brynna (1 mile north-east), Bryncae (1 mile east), Penprysg (1 mile west), Dolau (1 mile east) and Llanharan (1 mile east). Within a short drive, we also cover Bridgend (5 miles west), Maesteg (9 miles north-west), Porthcawl (10 miles west), Newcastle Higher (5 miles west), Ynysawdre (5 miles west) and Cefn Glas (5 miles west).

Near you in Brynnau Gwynion

Locally, our jobs take us to homes close to Pencoed Comprehensive School, Brynnau Primary School and Church of SS Ilid and Curig, among other places. The closest station to Brynnau Gwynion is Pencoed station, roughly 1.3 miles south-west. A little further out are Royal Glamorgan Hospital (3.7 miles east) and Llanilid Castle (0.8 miles south). Open spaces near Brynnau Gwynion include Nant Dyfrgi Pool and Mynydd Rhuthun.

Map of Brynnau Gwynion © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.