Bridgend · Wales

Bath chip & crack repair in Ynysawdre, Bridgend

We travel to Ynysawdre for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Ynysawdre?

Should you replace it?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why choose Surface Doctor in Ynysawdre

  • One-year guarantee on every repair
  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • No need to remove anything

Take a look at our full price list or bath cost comparison.

About our bath repair in Ynysawdre

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with scratches you can feel with a fingernail and an old repair that has yellowed or come loose, we can help, whatever the material.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Before and after: a chipped, rust-stained bath around the plughole
Location
Ynysawdre (CF32)
Region
Bridgend
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Covering Ynysawdre

Ynysawdre is about 3 miles north of Bridgend, in Bridgend. Anywhere in CF32, a technician comes to you. We work in 91 places in Bridgend.

Every address in CF32 is within our area, from the main roads to the quietest streets. Streets in the area include Park Road, Bryn Road and Pandy Road, and we cover them all. Ynysawdre is on the A4065, so it’s easy for us to reach. If you are just outside Ynysawdre, we cover Tondu (1 mile west), Sarn (1 mile south-east), Brynmenyn (1 mile north-east), Aberkenfig (1 mile south-west) and Bryn-coch (1 mile south-east). We also work in nearby towns such as Bridgend (3 miles south), Maesteg (5 miles north-west), Porthcawl (7 miles south-west), Newcastle Higher (3 miles south), Pencoed (4 miles east) and Bryntirion (3 miles south). Ynysawdre is among the bigger towns we cover in Bridgend.

What’s near Ynysawdre

In Ynysawdre, that means homes near Coleg Cymunedol Y Dderwen, Llynfi Arms and Bryngarw Country Park and the streets around them. You will also find Brynmenyn Primary School (within half a mile north-east), Ynysawdre Comprehensive School (within half a mile east) and Church of St Ffraid aka St Bride (0.5 miles south). There is a railway station in Ynysawdre itself: Tondu station. Nearby you’ll also find Glanrhyd Hospital (1.4 miles south) and Designer Outlet Bridgend (1.1 miles south-east). The countryside around Ynysawdre includes Tycribwr Hill and Cornelly Quarry Lake 2.

Map of Ynysawdre © OpenStreetMap contributors

For landlords and businesses

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We work for landlords, letting agents and housing providers in Ynysawdre as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Aftercare tips

Nothing complicated is needed:

  • Get a dripping tap fixed promptly
  • Rinse it down after each bath
  • Clean with warm water and a mild detergent
  • Keep metal cans and razors off the surface

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

Prices and what affects them

Repairs from £95. You will know the full cost before booking. We take into account:

  • How hard the colour is to match
  • Doing more than one item at once
  • The size and number of damaged areas
  • The material

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

The better the photos, the more accurate the price. Here’s what helps:

  • Any details about the material
  • A wider photo showing the whole bath
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

If you are in Ynysawdre and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Common questions in Ynysawdre

How long does the repair take to cure?

Normally by the following day, depending on the repair.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Is a holed acrylic bath repairable?

Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

What happens after I send photos?

We review the pictures and send a fixed quote and the next dates we have.

What information do you need?

Just photos, your postcode and a contact number. On the day, access to the room.

How much does bath repair cost in Ynysawdre?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

What we can’t put right

A repair isn’t right for every job, for example:

  • Leaking fittings, which need a plumber
  • Rust that has eaten right through a steel bath
  • Wear across the whole surface, which needs re-enamelling

Send us pictures and we will tell you honestly.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

Common problems we fix in Ynysawdre

Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.

You may need us if you’ve spotted any of these:

  • Scratches you can feel with a fingernail
  • Chips along the edge of the bath
  • Rusty patches near the plughole
  • A hole punched through by something heavy

Questions to ask before booking

  • What happens if the damage is worse than the pictures show
  • What prep work is covered
  • Whether there are any call-out or travel charges
  • What the guarantee covers, and for how long

How to compare quotes

What we do, step by step

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes two to three hours for most chips. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the next day.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Move bottles, mats and clutter away from the area
  • Have somewhere for us to park nearby if possible

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.