Bridgend · Wales
Bath Repair in Penprysg
Local bath repair for Penprysg: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
How we handle bath repair in Penprysg
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Typical jobs include rust by the waste and overflow and a kit repair that didn’t last, across roll-top & freestanding, acrylic and cast iron enamel.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Penprysg (CF35)
- County
- Bridgend
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- The size and number of damaged areas
- How hard the colour is to match
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Also in Penprysg
How to care for the repair
So the finish stays in good condition for years:
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your pictures, we will talk to you before going ahead.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Read more
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What we are called out for in Penprysg
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Most people contact us after spotting something like this:
- Chips along the edge of the bath
- Damage beneath the taps
- Impact holes in acrylic
- Scuffs and scratches in the surface
What your quote should include
- The length of the guarantee and what it covers
- What happens if they find more damage
- How long it needs to cure
- How to care for the finish
Should you replace it?
Swapping a damaged bath for a new one typically means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Penprysg clients choose us
- Colour-matched on site
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
See our prices page and bath cost comparison.
Common questions in Penprysg
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can you quote from pictures?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will there be a smell?
Expect a mild smell while we’re working.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Do you cover Penprysg?
Yes. We cover the entire UK and come to Penprysg and the rest of Bridgend. Send us photos for a fixed quote, or call 0345 017 0787.
Covering Penprysg
Penprysg is about 4 miles north-east of Bridgend, in Bridgend. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 91 towns and villages in Bridgend.
Every address in CF35 is within our area, from the main roads to the quietest streets. Whether you live on Pentwyn Road, Penybont Road and Lletai Avenue or a nearby road, a technician can come to you. You’ll find Penprysg on the A473, which makes it straightforward to reach. Nearby, we also work in Brynnau Gwynion (1 mile east), Brynna (2 miles east), Bryncae (2 miles east), Dolau (2 miles east) and Llanharan (2 miles east). Within a short drive, we also cover Bridgend (4 miles south-west), Maesteg (9 miles north-west), Porthcawl (9 miles west), Newcastle Higher (4 miles south-west), Ynysawdre (4 miles west) and Cefn Glas (5 miles west).
Landmarks near Penprysg
Locally, our jobs take us to homes close to Pencoed Primary School, Pencoed Comprehensive School and Little Penybont Arms. For rail, the closest station is Pencoed station, about 0.6 miles south-west. Other landmarks nearby include Llanilid Castle (1.1 miles south-east) and Designer Outlet Bridgend (3.5 miles west). The countryside around Penprysg includes Pen Coed-y-mwstwr and Nant Dyfrgi Pool.
About our accreditations · Every repair comes with a one-year guarantee.
